SHOP
Cart
Shop

POE Solutions

Built for Every PoE Need

The Ultimate Portfolio with Over 130 Models

The Most Complete, Versatile, and Scalable Industrial PoE Portfolio

As the go-to expert in industrial PoE, Moxa delivers a comprehensive and growing range of PoE switches and accessories, ensuring reliable power sourcing and seamless connectivity.

With the rapid adoption of AI, IIoT, and data-driven technologies, the demand for PoE powered, robust edge connectivity continues to grow. To ensure the timely launch of systems, simplifying deployment and management of these PoEs have become more significant. Moxa’s latest PoE product series offers enhanced flexibility, efficiency, and simplified deployment, empowering mission-critical applications with reliable performance.

PoE Product Selection Guide

Free Download

SDS-3006/G3006/3010/G3010 Series

Full Gigabit Smart Ethernet Switches with PoE+ Option

  • 6/10-port FE/GbE with 4/8 PoE+ options
  • 36-watt output per PoE+ port in high-power mode
  • Moxa Smart PoE: PD failure detection & auto-reboot for consistent uptime
  • Remote monitoring of PoE powering status via SNMP & MXview One
  • Redundant dual DC power inputs

IMC-P21A-G2/P21GA-G2 Series

PoE+ Fast/Gigabit Ethernet-to-Fiber Media Converter

  • 36-watt output per PoE+ port in high-power mode
  • Ethernet-to-fiber conversion with high-EMI immunity up to 80 km
  • Redundant dual DC power inputs
  • Supports store-and-forward and pass-through modes

Moxa PoE Solutions

PoE/PoE+/PoE++

All PoE standards (PoE/PoE+/PoE++) are supported. Moreover, Moxa’s proprietary PoE solutions with 36 W and 60 W high power output satisfy custom needs.

Industrial Reliability

Rugged hardware is designed for harsh environments. Moxa’s many innovations ensure our products are built to last and deliver uninterrupted network communications for critical automation systems

One-Stop Shop for a Complete Lineup

A complete lineup with over 130 models offers one-stop shop flexibility. We cater to all power budgets, HV/LV redundant power inputs, Ethernet interfaces, form factors, installation requirements, and more.

Rackmount Managed Switches
PoE Product
Selection Guide

Layer
Layer 2/3
Layer 2/3
Layer 3
Layer 2
Layer 2
Moxa Solutions
RKS-G4028 Series
PT-G7828/G7728 Series
ICS-G7848A /G7850A/G7852A Series
ICS-G7748A /G7750A/ G7752A Series
IKS-6728A Series
PoE Port Up to 24 x PoE++ / GPoE++ Up to 24 x PoE+ / GPoE+ 48 x PoE+ 48 x PoE+ Up to 24 x PoE+
Ethernet Port Up to 28 x GE 28 x GE 0/2/4 x 10GE + 48 x GE 0/2/4 x 10GE + 48 x GE 4 x GE + 24 x FE
PoE Output (Per Port) 90 W 36 W 36 W 36 W 36 W
Dual Power Inputs LV models: 24/48 VDC HV models: 110/220 VAC&VDC External PoE power models: 48 VDC 48 VDC for PoE+ ports and system power 110/220 VAC for system power
Operating Temp. Range -40 to 75°C -40 to 85°C -10 to 60°C -10 to 60°C -40 to 75°C
Certification IEC-61850-3, IEEE 1613, EN 50121-4 IEC-61850-3, EN-50121-4 EN-50121-4 EN-50121-4 EN-50121-4

NOTE: Refer to the individual product datasheets on the Moxa website for the most updated specifications and features. Or click here to learn more about Moxa PoE switches.

Back to Product Portfolio

Madular Managed Switches
PoE Product
Selection Guide

Layer
Layer 2
Layer 3
10GE Layer 2
10GE Layer 3
Moxa Solutions
MDS-G4012/G4020/G4028 Series
MDS-G4012-L3/G4020-L3/G4028-L3 Series
MDS-G4012-4XGS/ G4020-4XGS/G4028-4XGS Series
MDS-G4012-L3-4GXS/ G4020-L3-4GXS/G4028-L3-4GXS Series
PoE Port 8/16/24 x PoE/GPoE+
Ethernet Port 4 x GE + up to 24 x FE/GE ports modules 4 x 10GE + up to 24 x FE/GE ports modules
PoE Output (Per Port) 36W
Dual Power Inputs LV models: 24/48 VDC HV models: 110/220 VAC&VDC External PoE power models: 48 VDC
Operating Temp. Range Standard temp. models: -10 to 60°C Wide temp. models: -40 to 75°C
Certification IEC-61850-3, IEEE 1613, EN 50121-4, Class I Division 2, ATEX, NEMA IEC-61850-3, IEEE 1613, EN 50121-4, NEMA
NOTE: Refer to the individual product datasheets on the Moxa website for the most updated specifications and features. Or click here to learn more about Moxa PoE switches.

Managed Switches
PoE Product
Selection Guide

Layer
Layer 2
Layer 2
Layer 2
Layer 2
Layer 2
Layer 2
Layer 2
Layer 2
Layer 2
Moxa Solutions
EDS - 4008 Series
EDS - 4012 Series
EDS - G4012 Series
EDS - P506E Series
EDS - G512E Series
EDS - P510A Series
TN - G6500 Series
TN - G5500 Series
TN - 4500A Series
PoE Port 4 x PoE++ 8 x PoE++ 8 x GPoE++ 4 x PoE+ 8 x GPoE++ 8 x GPoE++ 8 x GPoE++ 8 x GPoE++ Up to 16 x PoE+
Ethernet Port Up to 28 x GE 28 x GE 0/2/4 x 10GE + 48 x GE 0/2/4 x 10GE + 48 x GE 12 x GE 8 x FE + 2 x GE or SFP 12 x GE with push-pull M12 connectors 2 x GE + 8~18 x FE 4 x GE + 12/24 x FE
PoE Output (Per Port) 90 W 36 W 36 W 36 W 36 W 36 W 30 W 30 W 30 W
Dual Power Inputs LV models: 24/48 VDC HV models: 110/220 VAC&VDC External PoE power models: 48 VDC 48 VDC for PoE+ ports and system power 110/220 VAC for system power 48 VDC 24/36/48/72/96/110 VDC 24/36/48/72/96/110 VDC 24/36/48/72/96/110 VDC
Operating Temp. Range -40 to 75°C -40 to 85°C -10 to 60°C -10 to 60°C -40 to 75°C -40 to 75°C -40 to 70°C -40 to 75°C -40 to 70°C
Certification IEC-61850-3, IEEE 1613, EN 50121-4 IEC-61850-3, EN-50121-4 EN-50121-4 EN-50121-4 EN-50121-4 EN-50121-4, Class I Division 2, NEMA TS2 EN 50121-4, EN 50155 EN 50121-4, EN 50155 EN 50121-4, EN 50155

Smart Switches
PoE Product
Selection Guide

Layer
Layer 2
Moxa Solutions
SDS-3006 Series
SDS-G3006 Series
SDS-3010 Series
SDS-G3010 Series
PoE Port 4 x GPoE+ 4 x GPoE+ 8 x GPoE++ 4 x PoE+
Ethernet Port 4 x FE+ 2 x GE or SFP 4 x GE + 2 x GE or SFP 8 x FE + 2 x GE or SFP 8 x GE + 2 x GE or SFP
PoE Output (Per Port) 36 W
Dual Power Inputs 12/24/48 VDC 12/24/48 VDC 48 VDC 48 VDC
Operating Temp. Range Standard temp. models: -10 to 60°C
Wide temp. models: -40 to 75°C
Certification

NOTE: Refer to the individual product datasheets on the Moxa website for the most updated specifications and features. Or click here to learn more about Moxa PoE switches.

Back To Product Portfolio

Unmanaged Switches
PoE Product
Selection Guide

Layer
Moxa Solutions
EDS-G205A Series
EDS-P206A Series
TN-5300A Series PoE Models
PoE Port 4 x GPoE+ 4 x GPoE+ 8 x GPoE++
Ethernet Port 5 x GE 6 x FE or 4 x FE + up to 2 x Fiber 8 x FE
PoE Output (Per Port) 30 W 30 W 30 W
Dual Power Inputs 12/24/48 VDC 12/24/48 VDC 24/36/48/72/96/110 VDC (Single input)
Operating Temp. Range Standard temp. models: 0 to 60°C Wide temp. models:-40 to 75°C Standard temp. models: -10 to 60°C Wide temp. models:-40 to 75°C Standard temp. models: -40 to 70°C
Certification EN-50121-4 EN 50121-4, EN 50155

NOTE: Refer to the individual product datasheets on the Moxa website for the most updated specifications and features. Or click here to learn more about Moxa PoE switches.

Back To Product Portfolio

Plug-in Modules
PoE Product
Selection Guide

Layer
PoE+ Injectors
PoE+ Injectors
PoE Splitters
Ethernet-to-fiber Media Converters
Moxa Solutions
INJ-24A
Series
INJ-24
Series
SPL-24
Series
IMC-P101 Series
IMC-P21GA-G2 Series
IMC-P21GA-G2 Series
PoE Port 1 x GPoE+ 1 x GPoE+ 1 x GPoE+ 1 x GPoE+ 1 x GPoE+ 1 x GPoE+
Ethernet Port 1 x GE 1 x FE 1 x FE 1 x FE Fiber 1 x FE Fiber 1 x FE Fiber
PoE Output (Per Port) 60 W 30 W 12.95 W 30 W 36 W 36 W
Dual Power Inputs 24/48 VDC(Single input) 24/48 VDC(Single input) - 48 VDC 48 VDC/td> 48 VDC/td>
Operating Temp. Range Standard Temp.: 0 to 60°C Wide Temp.:-40 to 75°C Standard temp. models: -10 to 60°C Wide temp. models: -40 to 75°C
Certification - DNV-GL, ABS, LR, NK - - -

NOTE: Refer to the individual product datasheets on the Moxa website for the most updated specifications and features. Or click here to learn more about Moxa PoE switches.

Back To Product Portfolio

PoE is a key component of modern automation networks, but smarter PoE takes it further—accelerating deployment, streamlining management, and enhancing long-term efficiency. That’s where Moxa Smart PoE technology comes in.

Download the Moxa Smart PoE Tech Note to see how you can optimize your PoE networks.

TECH NOTE

Smarter Industrial PoE Deployment: Overcoming Voltage, Visibility, and Power Constraints

Free Download

Smart Powering ensures all devices receive proper power, including non-standard ones.

Smart Power Management automates power output cutoff, scheduling, and PoE alerts for system reliability and optimized load.

Smart Power Diagnostics detects PD failures, enables auto-reboot, and recommends optimal PoE port configurations for seamless setup and troubleshooting.

Watch Video

Industrial Applications Deployed with Moxa PoE Solutions

PoE Communication Networks for Intelligent Transportation Systems

  • Highway Traffic Monitoring
  • ETC Systems
  • Intersection Monitoring
  • IP Surveillance in Public Transport Interchange
  • Runway De-icing Systems

Highway Traffic Monitoring ETC Systems Intersection Monitoring IP Surveillance in Public Transport Interchange Runway De-icing Systems

Communication Network for Tramway Ticketing System

Seamless Power and Data Delivery in Unmanned Warehouses with PoE

Remote Pipeline Monitoring

Security Monitoring Network for Power Substation Access Control

Reliable PoE Networks for Automated Rubber-tired Gantry Cranes (ARTG)

To learn more application cases, please click here to download Moxa PoE Application Note.

Features and Benefits

Robust Reliability

  • High MTBF – no fan or heater needed

  • High EMI resistance

  • Hot-swappable design for modular PoE switches

  • Multiple industry certifications

Support All PoE Standard

  • Support 802.3bt PoE++ with up to 90 W per port

  • Support standard PoE/PoE+ and Moxa proprietary high power PoE 36 W and 60 W.

IACS-level Device Security

  • Built-in device security based on the IEC 62443-4-2 standards (EDS-4000/G4000 Series and RKS-G4000 Series are IEC 62443-4-2 certified)

Withstand Extreme Temperatures

  • -10 to 60°C

  • Wide-temperature models: -40 to 75°C/85°C

HV/LV Power Options

  • Support 12/24/48 VDC input

  • Dual isolated redundant power supplies with HV/LV options

PoE Surge Protection

  • 3 kV LAN surge protection to protect equipment from electric power surges and spikes

Flexible Design

  • 10GbE/2.5GbE/GbE/FE port speed options

  • RJ45, SFP, and PoE interface module options

  • DIN-rail, rackmount, and wall mount installations

Visualized Network Management: MXview One

  • Automatic topology visualization available on a real-time dashboard with comprehensive network reporting

  • Security View for checking the security level of network devices

  • Mass configuration allows 10x faster device deployment instead of deploying devices one by one

  • Easy integration through RESTful API, web widget, and syslog with other IT/OT applications

  • SFP fiber list for fiber link status and warnings

  • Supports event searches and playback functions for more efficient troubleshooting

Network Redundancy and Scalability

  • Supports Turbo Ring and Turbo Chain for Gigabit redundancy under 50 ms (FE redundancy under 20 ms)

  • Turbo Chain can interoperate with other Ethernet ring protocols such as RSTP and STP

  • MDS-G4000 Series support up to four 10GbE and 48 GbE uplinks

  • EDS-4000/G4000 Series support up to six 2.5GbE uplink ports

  • MDS-G4000 Series supports VRRP for routing redundancy, and Layer 3 routing to interconnect multiple LAN segments

The Most Complete, Versatile, and Scalable Industrial PoE Portfolio

Application Note

Advanced Network Performance for Video Surveillance Systems

Download

Featured Article

Five Important Questions to Consider Before Powering Industrial Systems with Power over Ethernet (PoE)

Download

White Paper

How Industrial PoE Switches Facilitate Reliable Outdoor IP Surveillance Networks

Download

Top 3 Network Design Factors for PoE Surveillance

Site Conditions and PoE Switches

Contact For More Details

Your Messages

Digital Mining

Real-time Video Streaming and Monitoring Network for Autonomous Haulage System in Surface Mining

Requirements
  • A reliable cellular communication and networking solution for real-time monitoring of autonomous mining trucks 
  • A compact, robust design for on-board equipment that withstands constant vibration and harsh environments
  • PoE switches for powering the powered devices (PDs) on trucks
  • Ease of configuring and diagnosing
Why Moxa
  • High MTBF and five-year warranty
  • Anti-shock and anti-vibration PoE switches, IP cameras, remote I/O, and industrial computers with M12 connectors, all with dust-tight IP rating
  • OnCell LTE cellular router featuring VPN, firewall, and NAT functions to protect internal networks from unauthorized access
  • Fanless design that delivers outstanding thermal performance
  • Awarded multiple industry certifications
  • ABC-01 Series configurators offer automatic network configuration backup and restoration, improving maintenance efficiency while reducing system downtime

Smart Rail

Communication Network for Tramway Ticketing System

Requirements
  • Long-distance data transmission from multiple ticketing kiosks for traffic analysis
  • Redundant network connectivity to ensure uninterrupted system operations
  • Industrial-grade durability to withstand onboard shocks and vibrations
  • Cost-effectiveness
Why Moxa
  • RKS-G4028 Series’ fiber module supports long-distance communication
  • RKS-G4028 Series with optional 802.3bt PoE module supports 90 W power output per port
  • Turbo Ring and Turbo Chain technologies support Gigabit network recovery time of less than 50 ms at 250-switch load
  • RKS-G4028 Series features a wide operating temperature range from -40 to 75˚ C
  • EN 50121-4 certified to withstand extreme wayside conditions
  • Complete communication networks with network infrastructure, edge connectivity, and computing solutions to ensure interoperability and reduce system integration costs

Smart Warehousing

Seamless Power and Data Delivery in Unmanned Warehouses with PoE

Requirements
  • High power output to support numerous wireless APs
  • Enhanced AMR efficiency through fast data transmission across both wired and wireless networks
  • Compact design suitable for machine installation
  • Dependable performance with strong vibration and EMI noise resistance
Why Moxa
  • The EDS-4008 Series provide up to 90W per port with PoE++ capability, delivering ample power for multiple wireless APs.
  • The EDS-4008 Series offer full GbE uplinks with options for 2.5G SFP modules, ensuring high-bandwidth connectivity suitable for intensive data transmission needs.
  • Compact, robust design for easy machine integration and enhanced EMC and RF protection
  • Support 802.11ac performance and include Turbo Roaming technology, enabling seamless millisecond-level handovers for uninterrupted wireless connectivity.
  • The UN model adheres to multi-region RF certification compliance, ensuring broad usability and regulatory acceptance across different regions markets.

Oil and Gas

Remote Pipeline Monitoring

Requirements
  • Long-distance Gigabit network backhaul to connect subsystems in the field
  • Reduce power cabling issues for remote IP cameras and other PDs
  • Reliable, high-density Ethernet switches with multiple interfaces that can aggregate real-time video, voice, and data from remote subsystems
  • Resilient industrial-grade devices that can operate in harsh conditions
  • A DIN-rail design to fit inside cabinets
Why Moxa
  • Modular switches with fiber interfaces to connect pipeline subsystems to the remote control center over long distances
  • Adequate PoE power supply
  • Gigabit Turbo Ring supports network recovery time less than 50 ms
  • Fanless, compact, and rugged ATEX Zone 2-and C1D2-certified design featuring DIN-rail installation
  • MXview One Series networking management software offers real-time monitoring of network status from the control center

Power Substations

Security Monitoring Network for Power Substation Access Control

Requirements
  • Millisecond-level recovery networks to connect more than 150 substations nationwide
  • 24/7 reliability for continuous security monitoring
  • Connectivity and availability during EMI and surge conditions
  • Reduce power cabling issues for remote IP cameras and VoIP
  • Real-time monitoring and management to reduce costly visits to remote unmanned locations
Why Moxa
  • EDS-P510A Series PoE switches allow for high bandwidth, long-distance transmission as well as PoE+ power supply to remote powered devices
  • EDS-P510A Series and IKS-G6728A Series support Turbo Ring and Turbo Chain network redundancy
  • Industrial-grade products designed to withstand harsh operating conditions
  • Embedded Smart PoE function enables the EDS-P510A Series PoE switches to detect failures and auto-reboot powered devices to ensure continuous operation

Container Terminal Automation

Reliable PoE Networks for Automated Rubber-tired Gantry Cranes (ARTG)

Requirements
  • PoE switches to overcome wire-deployment obstacles at height or on the ground
  • Each port supplies 60 W power to high-resolution cameras, including PTZ cameras, for accurate container recognition
  • Robust switches must withstand outdoor environments, particularly constant exposure to humid and salt-rich coastal air
  • High-reliability networks to ensure real-time image processing and transmission
  • User-friendly network management software that allows operators to manage the ARTG crane system network remotely and effectively
Why Moxa
  • Comprehensive PoE switches portfolio that satisfies all IP camera power sourcing requirements
  • To power up multiple cameras, the EDS-P506E-4PoE Series supports up to four 60 W PoE ports with a 180 W power budget
  • High EMI protection, a fanless design for harsh outdoor environments, and a wide operating temperature range from -40 to 75°C
  • Smart PoE function supports automatic PD failure detection and rebooting for network recovery, eliminating or minimizing the need for manual inspection or maintenance
  • MXview One Series network management software features real-time visualization of network status to improve ARTG crane system reliability
  •  

Inquiry Form – Managed Ethernet Switches

MGate MB3180/MGate MB3280/MGate MB3480

1, 2, or 4 port Modbus serial (RTU) to Modbus TCP gateway

Product Features

  • Supports Auto-Device Routing for easy configuration
  • Supports route by TCP port or IP address for flexible deployment
  • Convert between Modbus TCP and Modbus RTU/ASCII
  • 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports
  • 16 simultaneous TCP masters with up to 32 simultaneous requests per master
  • Easy hardware setup and configuration
 

Product Description

These devices are Modbus RTU to Modbus TCP gateway converter for 1, 2, & 4 Serial ports. Up to 16 simultaneous Modbus TCP masters are supported, with up to 31 RTU/ASCII slaves per serial port. For RTU/ASCII masters, up to 32 TCP slaves are supported. Standard Modbus network integration, Moxa protocol converter gateway The three standard MGate™ Modbus RTU to Modbus TCP gateway converters (MB3180, MB3280, and MB3480) are designed for easy integration of Modbus RTU to Modbus TCP gateway.. With these models, Modbus serial slave devices can be seamlessly incorporated into an existing Modbus TCP network, and Modbus TCP slaves can be made accessible to serial masters. The MB3180, MB3280, and MB3480 offer features that make network integration easy, customizable, and compatible with almost any Modbus network. High density, cost effective gateway The MGate™ MB3000 Series Modbus RTU to Modbus TCP gateway converters can effectively connect a high density of Modbus nodes to the same network. The MB3280 can manage up to 62 serial slave nodes, and the MB3480 can manage up to 124 serial slave nodes. Each RS-232/422/485 serial port can be configured individually for Modbus RTU or Modbus ASCII operation and for different baudrates, allowing both types of networks to be integrated with Modbus TCP through one Modbus gateway. Auto-Device Routing for Easy Configuration (Patent Pending) Moxa’s Auto-Device Routing function helps eliminate many of the problems and inconveniences encountered by engineers who need to configure large numbers of Modbus devices. A single mouse click is all that’s required to set up a slave ID routing table and configure Modbus gateways to automatically detect Modbus requests from a supervisory control and data acquisition (SCADA) system. By removing the need to manually create the slave ID routing table, the Auto-Device Routing function saves engineers significant time and cost.

Datasheet
Technology Page

MGate MB3660 Series

8 and 16-port redundant Modbus gateways

Product Features

  • Supports Auto-Device Routing for easy configuration
  • Supports route by TCP port or IP address for flexible deployment
  • Innovative Command Learning eliminates the need to key-in
  • SCADA Modbus commands (acts as an agent gateway)
  • High performance through active and parallel polling of serial devices
  • Supports serial (Master) to serial (Slave) communications
  • 2 Ethernet ports with the same IP or dual IP addresses
  • SD card for configuration backup Modbus Auto-Device Routing
  • Access by up to 256 TCP master/client devices, or connect to 128 TCP slave/server devices
  • Dual VDC or VAC power inputs with wide power input range
  • 3-pin fault relay circuit for event alarms
  • 2 kV isolation protection (for “-I” models)

Product Description

The MGate MB3660 (MB3660-8 and MB3660-16) are Modbus RTU to Modbus TCP Gateway, redundant Modbus gateways that convert between the Modbus TCP and Modbus RTU/ASCII protocols. They can be accessed by up to 256 TCP master/client devices, or connect to 128 TCP slave/server devices. The MGate MB3660 series Modbus RTU to Modbus TCP Gateway has isolation models which provides 2 kV isolation protection suitable for power substation applications. The MGate MB3660 gateways are designed to easily integrate Modbus TCP and RTU/ASCII networks. The MGate MB3660 series gateways offer features that make network integration easy, customizable, and compatible with almost any Modbus network. For large-scale Modbus deployments, MGate MB3660 gateways can effectively connect a large number of Modbus nodes to the same network. The MB3660 series can physically manage up to 248 serial slave nodes for 8-port models or 496 serial slave nodes for 16-port models (the Modbus standard only defines Modbus IDs from 1 to 247). Each RS-232/422/485 serial port can be configured individually for Modbus RTU or Modbus ASCII operation and for different baudrates, allowing both types of networks to be integrated with Modbus TCP through one Modbus gateway.

Datasheet
Technology Page

IKS-G6524A Series

24G-port Layer 2 full Gigabit managed Ethernet switches

Product Features

  • Supports MXstudio for easy, visualized industrial network management
  • V-ON™ ensures millisecond-level multicast data and video network recovery
  • 24 Gigabit Ethernet ports
  • Up to 24 optical fiber connections (SFP slots)
  • Fanless, -40 to 75°C operating temperature range (T models)
  • Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
  • Isolated redundant power inputs with universal 110/220 VAC power supply range

Product Description

Process automation and transportation automation applications combine data, voice, and video, and consequently require high performance and high reliability industrial grade rackmount switches. The IKS-G6524A series full Gigabit backbone switches are equipped with 24 Gigabit Ethernet ports, and support Layer 3 routing functionality to facilitate the deployment of applications across networks, making them ideal for large scale industrial networks. The IKS-G6524A’s full Gigabit capability increases bandwidth to provide high performance and the ability to quickly transfer large amounts of video, voice, and data across a network. The switches support the Turbo Ring, Turbo Chain, and RSTP/STP redundancy protocols, and are fanless and come with an isolated redundant power supply to increase system reliability and the availability of your network backbone.

Datasheet
Get a Quote

IKS-6726A/IKS-6728A Series

24+2G/24+4G-port modular managed Ethernet switches

Product Features

  • Modular design lets you choose from a variety of media combinations
  • -40 to 75°C operating temperature range
  • Supports MXstudio for easy, visualized industrial network management
  • V-ON™ ensures millisecond-level multicast data and video network recovery
  • 2/4 Gigabit plus 24 Fast Ethernet ports for copper and fiber
  • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
  • Isolated redundant power inputs with universal 24/48 VDC or 110/220 VAC power supply

Product Description

The IKS-6726A/6728A series of industrial rackmount switches are designed to meet the rigorous demands of mission critical applications for industry and business, such as traffic control systems and maritime applications. The IKS-6726A/6728A’s Gigabit and fast Ethernet backbone, redundant ring, and 24/48 VDC or 110/220 VAC ual isolated redundant power supplies increase the reliability of your communications and save on cabling and wiring costs. The modular design of the IKS-6726A/6728A also makes network planning easy, and allows greater flexibility by letting you install up to 4 Gigabit ports and 24 fast Ethernet ports.

Datasheet
Get a Quote
 
  • Meets a wide range of demands from Fast Ethernet to full Gigabit industrial networks (up to 28 Gigabit ports)Modular interfaces for flexible connector type combinations
  • Support for IEEE 802.3bt PoE for up to 90 W output per port
  • High EMC immunity compliant with IEC 61850-3 and IEEE 1613
  • Hardware-based IEEE 1588 PTP for high-precision time synchronization
  • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches) , and STP/RSTP/MSTP for network redundancy
  • -40 to 75°C operating temperature range
  • Supports MXstudio for easy, visualized industrial network management
  • Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards

Product Description

The RKS-G4028 Series is designed to meet the rigorous demands of mission-critical applications for industry and business, such as power substation automation systems (IEC 61850-3, IEEE 1613), railway applications (EN 50121-4), and factory automation systems. The RKS-G4028 Series’ Gigabit and Fast Ethernet backbone, redundant ring, and 24 VDC, 48 VDC, or 110/220 VDC/VAC dual isolated redundant power supplies increase the reliability of your communications and save on wiring costs.

The modular design of the RKS-G4028 Series also makes network planning easy, and allows greater flexibility by letting you install up to 28 Gigabit ports with various connector types.

Get a Quote

EDS-608/EDS-611/EDS-616/EDS-619 Series

8, 8+3G, 16, 16+3G-port compact modular managed Ethernet switches

Product Features

  • Up to 19 optical fiber connections in a compact switch (EDS-619)
  • Modular design with 4-port copper/fiber combinations
  • Hot swap media modules for continuous operation
  • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
  • TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
  • Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01
  • Supports MXstudio for easy, visualized industrial network management

Product Description

The versatile modular design of the compact EDS-600 series Ethernet switch allows users to combine fiber and copper modules to create switch solutions suitable for any automation network. The EDS-600’s modular design lets you install up to 3 Gigabit Ethernet ports and 16 Fast Ethernet ports, and the advanced Turbo Ring and Turbo Chain (recovery time < 20 ms) technology, RSTP/STP, and MSTP helps increase the reliability and availability of your industrial Ethernet network. Models with an extended operating temperature range of -40 to 75°C are also available. The EDS-600 series supports several reliable and intelligent functions, including IEEE 1588 PTPv2, EtherNet/ IP, Modbus/TCP, LLDP, DHCP Option 82, SNMP Inform, QoS, IGMP snooping, VLAN, TACACS+, IEEE 802.1X, HTTPS, SSH, SNMPv3, and more, making the Ethernet switches suitable for any harsh industrial environment.

Datasheet
Get a Quote

EDS-510E Series

7+3G-port Gigabit managed Ethernet switches

Product Features

  • V-ON™ ensures millisecond-level multicast data and video network recovery
  • 3 Gigabit Ethernet ports for redundant ring or uplink solutions
  • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/ STP, and MSTP for network redundancy
  • RADIUS, TACACS+, SNMPv3, IEEE 802.1x, HTTPS, SSH, and MAC address sticky to enhance network security
  • Security features based on IEC-62443
  • EtherNet/IP, PROFINET, and Modbus/TCP protocols supported for device management and monitoring
  • Supports MXstudio for easy, visualized industrial network management

Product Description

The EDS-510E is a Industrial grade managed ethernet switch. The Gigabit managed Ethernet switch is designed to meet rigorous mission critical applications, such as factory automation, ITS and process control. The 3 Gigabit Ethernet ports allows great flexibility to build up a Gigabit redundant Turbo Ring and a Gigabit uplink. The switch adopts USB interfaces for switch configuration, system file backup, and firmware upgrade, making it easier to manage.

Datasheet
Get a Quote

EDS-G508E/EDS-G512E/EDS-G516E Series

8G/12G/16G-port full Gigabit managed Ethernet switches

Product Features

  • V-ON™ ensures millisecond-level multicast data and video network recovery
  • Up to 12 10/100/1000BaseT(X) ports and 4 100/1000BaseSFP ports (EDS-G516E)
  • Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
  • RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1x, MAC ACL, HTTPS, SSH, and MAC-address sticky to enhance network security
  • Security features based on IEC-62443
  • EtherNet/IP, PROFINET, and Modbus/TCP protocols supported for device management and monitoring
  • Supports MXstudio for easy, visualized industrial network management

Product Description

The EDS-G500E series is a Industrial grade managed ethernet switch& is  equipped with 8/12/16 Gigabit Ethernet ports and up to 4 fiber optic ports, making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. Gigabit transmission increases bandwidth for higher performance and transfers large amounts of triple-play services across a network quickly. Redundant Ethernet Turbo Ring, Turbo Chain, RSTP/STP, and MSTP increase system reliability and the availability of your network backbone. The EDS-G500E series is designed especially for communication demanding applications, such as video and process monitoring, ITS, and DCS systems, all of which can benefit from a scalable backbone construction.

Datasheet
Get a Quote

MDS-G4028

28G-port Layer 2 full Gigabit modular managed Ethernet switch

Product Features

  • Multiple interface type 4-port modules for greater versatility
  • Easy replacement of defect ports to minimize downtime and MTTR
  • Passive backplane to minimize the risk of malfunction
  • Ultra-compact size for easy installation
  • Rugged die-casting design for use in harsh environments
  • HTML5 for a better user experience

Product Description

The MDS-G4028 Series modular managed ethernet switch supports up to 28 Gigabit ports, including 4 embedded ports, 6 interface module expansion slots, and 2 power module slots to ensure sufficient flexibility for a variety of applications. The highly compact MDS-G4000 Series is designed to meet evolving network requirements, ensuring effortless installation and maintenance, and features a hot-swappable module design that enables you to easily change or add modules without shutting down the switch or interrupting network operations. The multiple Ethernet modules (RJ45, SFP, and PoE+) and power units (24/48 VDC, 110/220 VAC/VDC) provide even greater flexibility as well as suitability for different operating conditions, delivering an adaptive full Gigabit platform that provides the versatility and bandwidth necessary to serve as an Ethernet aggregation/edge switch. Featuring a compact design that fits in confined spaces, multiple mounting methods, and convenient tool-free module installation, the MDS-G4000 Series switches enable versatile and effortless deployment without the need for highly skilled engineers. With multiple industry certifications and a highly durable housing, the MDS-G4000 Series can reliably operate in tough and hazardous environments such as power substations, mining sites, ITS, and oil and gas applications. Support for dual power modules provides redundancy for high reliability and availability while LV and HV power module options offer additional flexibility to accommodate the power requirements of different applications. In addition, the MDS-G4000 Series modular managed ethernet switches features an HTML5–based, user-friendly web interface providing a responsive, smooth user experience across different platforms and browsers. Check MDS-G4012 (12 port modular switch) clicking here & MDS-G4020 (20 ports modular switch) on clicking here

Datasheet
Get a Quote

EDS-G4014 SERIES

8G+6 2.5GbE-port full Gigabit managed Ethernet switches

Product Features

  • Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards
  • Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), and RSTP/STP for network redundancy
  • Wide range of power input options for flexible deployment
  • Compact and flexible housing design to fit into confined spaces
  • Supports MXstudio for easy, visualized industrial network management
  • Increased bandwidth capabilities with fiber SFP slots supporting up to 2.5 Gbps

Product Description

The EDS-G4014 Series is equipped with eight Gigabit Ethernet ports and six 2.5 Gbps fiber-optic ports, making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. Gigabit transmission speed increases bandwidth for higher performance and can transfer large amounts of triple-play services across a network quickly. Redundant Ethernet technologies such as Turbo Ring, Turbo Chain, and RSTP/STP increase the reliability of your system and improve the availability of your network backbone. The EDS-G4014 Series is designed specifically for demanding applications such as video and process monitoring, ITS, and DCS systems, all of which can benefit from a scalable backbone. The EDS-G4014 Series is compliant with the IEC 62443-4-2 and IEC 62443-4-1 Industrial Cybersecurity certifications, which cover both product security and secure development life-cycle requirements, helping our customers meet the compliance requirements of secure industrial network design.

Get A quote

NPort 5150AI-M12/NPort 5250AI-M12/NPort 5450AI-M12 Series

Railway 1, 2, and 4-port RS-232/422/485 serial device servers

Product Features

  • Speedy 3-step web-based configuration
  • COM port grouping and UDP multicast applications
  • Real COM/TTY drivers for Windows and Linux
  • Standard TCP/IP interface and versatile TCP and UDP operation modes
  • Complies with all EN 50155 mandatory test items*
  • M12 connector and IP40 metal housing
  • 2 kV isolation for serial signals
 

Product Description

The NPort 5000AI-M12 is a Serial to Ethernet Module, designed to make serial devices network-ready in an instant, and provides direct access to serial devices from anywhere on the network. Moreover, the NPort 5000AI-M12 is compliant with EN 50121-4 and mandatory sections of EN 50155, covering operating temperature, power input voltage, surge, ESD, and vibration, making them suitable for rolling stock and wayside applications where high levels of vibration exist in the operating environment.

NPort 5100A Series

1-port RS-232/422/485 serial device servers

Product Features

  • Surge protection for serial, Ethernet, and power lines
  • COM port grouping and UDP multicast applications
  • Standard TCP/IP interface and versatile TCP and UDP operation modes
  • Speedy 3-step web-based configuration
  • Screw connectors for secure installation
  • Real COM/TTY drivers for Windows and Linux
  • Connect up to 8 TCP hosts
  • Only 1 W power consumption
 

Product Description

The NPort® 5100A device servers are worlds most popular Serial to Ethernet Gateways, designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort® 5100A device servers are ultra-lean, ruggedized, and user-friendly, making simple and reliable serial-to-Ethernet solutions possible. A Greener Serial-to-Ethernet Solution

The MiiNe is a small but powerful Arm-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort® 5110A Series’ power consumption is less than 1 W. The NPort® 5100A Series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today’s industrial environments.

Datasheet
Technology Page

NPort 5110/NPort 5130/NPort 5150 Series

1-port RS-232 / 422 / 485 serial device server.

Product Features

  • Easy-to-use Windows utility for configuring multiple device servers
  • Small size for easy installation
  • SNMP MIB-II for network management
  • Real COM/TTY drivers for Windows and Linux
  • Standard TCP/IP interface and versatile operation modes
  • Configure by Telnet, web browser, or Windows utility
  • Adjustable pull high/low resistor for RS-485 ports
 

Product Description

NPort 5100 series device servers (serial to ethernet converters) are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for connecting serial devices such as card readers and payment terminals where connections are RS-232 & devices like PLC’s, Energy meters where Serial ports are RS-422 or RS-485, to an IP-based Ethernet LAN. Use the NPort 5100 series device servers to give your PC software direct access to serial devices from anywhere on the network. Using serial to ethernet converters to connect legacy serial devices to Ethernet is now common, and users expect device servers to be cost-effective and to provide a broad selection of useful functions. With its full support of Microsoft and Linux operating systems, the NPort 5110  provides the best choice for serial (RS-232)-to-Ethernet converters. For RS-485 port or a combo – RS-232 / 422 / 485 ports, please use our Nport 5130 or Nport 5150 models!

Datasheet
Technology Page

NPort 5210/NPort 5230/NPort 5232 Series

2-port RS-232/422/485 serial device servers

Product Description

The NPort 5200 serial to ethernet device servers are designed to make your industrial serial devices Internet-ready in no time. The compact size of NPort 5200 serial device servers makes them the ideal choice for connecting your RS-232 (NPort 5210/5230/5210-T/5230-T) or RS-422/485 (NPort 5230/5232/5232I/5230-T/5232-T/5232I-T) serial devices—such as PLCs, meters, and sensors—to an IP-based Ethernet LAN, making it possible for your software to access serial devices from anywhere over a local LAN or the Internet. The NPort 5200 Series has a number of useful features, including standard TCP/IP protocols and choice of operation modes, Real COM/TTY drivers for existing software, and remote control of serial devices with TCP/IP or traditional COM/TTY Port.

Datasheet
Technology Page

NPort 6150 Series

1-port RS-232/422/485 secure terminal servers

Product Features

  • Secure operation modes for Real COM, TCP Server, TCP Client, Pair Connection, Terminal, and Reverse Terminal
  • Nonstandard baudrates supported with high precision
  • Automatic RS-485 data direction control with Moxa’s patented ADDC®
  • Enhanced remote configuration with HTTPS and SSH
  • Port buffers for storing serial data when the Ethernet is offline
  • Supports IPv6
  • Generic serial commands supported in Command-by-Command mode
  • Security features based on IEC 62443

Product Description

The NPort® 6150 1-port device servers use the SSL and SSH protocols to transmit encrypted serial data over Ethernet. The NPort® 6150’s 3-in-1 serial port supports RS-232, RS-422, and RS-485, with the interface selected from an easy-to-access configuration menu.

Datasheet
Technology Page