EDS-G4014 Series
EDS-G4014 Series
8G+6 2.5GbE-port full Gigabit managed Ethernet switches
8G+6 2.5GbE-port full Gigabit managed Ethernet switches
The EDS-G4014 Series is equipped with eight Gigabit Ethernet ports and six 2.5 Gbps fiber-optic ports, making it ideal for upgrading an existing network
to Gigabit speed or building a new full Gigabit backbone. Gigabit transmission speed increases bandwidth for higher performance and can transfer large amounts of triple-play services across a network quickly.
Redundant Ethernet technologies such as Turbo Ring, Turbo Chain, and RSTP/STP increase the reliability of your system and improve the availability of your network backbone. The EDS-G4014 Series is designed specifically for demanding applications such as video and process monitoring, ITS, and DCS systems, all of which can benefit from a scalable backbone.
The EDS-G4014 Series is compliant with the IEC 62443-4-2 and IEC 62443-4-1 Industrial Cybersecurity certifications, which cover both product security and secure development life-cycle requirements, helping our customers meet the compliance requirements of secure industrial network design.
- Features
- Specifications
- Ordering info
-
- Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards
- Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), and RSTP/STP for network redundancy
- Wide range of power input options for flexible deployment
- Compact and flexible housing design to fit into confined spaces
- Supports MXstudio for easy, visualized industrial network management
- Increased bandwidth capabilities with fiber SFP slots supporting up to 2.5 Gbps
| Ethernet Interface | |
| 10/100/1000BaseT(X) Ports (RJ45 connector) | 8 |
| Auto MDI/MDI-X connection | |
| Auto negotiation speed | |
| Full/Half duplex mode | |
| 100/1000/2500BaseSFP Ports | 4 |
| 1000/2500BaseSFP Ports | 2 |
| Standards | IEEE 802.3 for 10BaseT |
| IEEE 802.3u for 100BaseT(X) | |
| IEEE 802.3ab for 1000BaseT(X) | |
| IEEE 802.3z for 1000BaseX | |
| IEEE 802.3bz for 2.5GBaseX | |
| IEEE 802.3x for flow control | |
| IEEE 802.3ad for Port Trunk with LACP | |
| IEEE 802.1Q for VLAN Tagging | |
| IEEE 802.1D-2004 for Spanning Tree Protocol | |
| IEEE 802.1w for Rapid Spanning Tree Protocol | |
| IEEE 802.1p for Class of Service | |
| IEEE 802.1X for authentication | |
| Ethernet Software Features | |
| Filter | GMRP, GVRP, GARP, 802.1Q VLAN, IGMP Snooping v1/v2/v3, IGMP Querier |
| Management | IPv4/IPv6, Flow control, Back Pressure Flow Control, DHCP Server/Client, ARP, RARP, LLDP, Port Mirror, Linkup Delay, SMTP, SNMP Trap, SNMP Inform, SNMPv1/v2c/v3, RMON, TFTP, SFTP, HTTP, HTTPS, Telnet, Syslog, Private MIB |
| MIB | P-BRIDGE MIB, Q-BRIDGE MIB, IEEE8021-SPANNING-TREE-MIB, IEEE8021-PAE-MIB, IEEE8023-LAG-MIB, LLDP-EXT-DOT1-MIB, LLDP-EXT-DOT3-MIB, SNMPv2-MIB, RMON MIB Groups 1, 2, 3, 9 |
| Redundancy Protocols | STP, RSTP, Turbo Ring v2, Turbo Chain, Ring Coupling, Dual-Homing, Link Aggregation |
| Security | Broadcast storm protection, Rate Limit, Trust access control, Static Port Lock, MAC Sticky, HTTPS/SSL, SSH, RADIUS, TACACS+, Login and Password Policy |
| Time Management | SNTP, NTP Server/Client, NTP Authentication |
| Protocols | IPv4/IPv6, TCP/IP, UDP, ICMP, ARP, RARP, TFTP, DNS, NTP Client, DHCP Server, DHCP Client, 802.1X, QoS, HTTPS, HTTP, Telnet, SMTP, SNMPv1/v2c/v3, RMON, Syslog |
| Switch Properties | |
| MAC Table Size | 16 K |
| Jumbo Frame Size | 9.216 KB |
| Max. No. of VLANs | 256 |
| VLAN ID Range | VID 1 to 4094 |
| IGMP Groups | 512 |
| Priority Queues | 4 |
| Packet Buffer Size | 1 Mbits |
| LED Interface | |
| LED Indicators | PWR1, PWR2, STATE, FAULT, MSTR/HEAD, CPLR/TAIL, SYNC |
| Serial Interface | |
| Console Port | RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1) |
| USB Interface | |
| USB Connector | USB Type A (Reserved) |
| Input/Output Interface | |
| Alarm Contact Channels | 1, Relay output with current carrying capacity of 1 A @ 24 VDC |
| Digital Input Channels | 1 |
| Digital Inputs | +13 to +30 V for state 1 |
| -30 to +3 V for state 0 | |
| Max. input current: 8 mA | |
| Buttons | Reset button |
| DIP Switch Configuration | |
| DIP Switches | Turbo Ring, Master, Coupler, Reserve |
| Power Parameters | |
| Connection | 2 removable 4-contact terminal block(s) |
| Pre-installed Power Module | -LV/-LV-T models: PWR-100-LV |
| -HV/-HV-T models: PWR-105-HV-I | |
| Note | The EDS-G4014 Series supports modular power supplies. The model names and power parameters are determined by the installed power module. |
| For example: | |
| EDS-G4014-6QGS-T + PWR-100-LV = EDS-G4014-6QGS-LV-T | |
| EDS-G4014-6QGS-T + PWR-105-HV-I = EDS-G4014-6QGS-HV-T | |
| If you install a different power module, refer to the specifications of the corresponding model. For example, if you replace the power module of the EDS-G4014-6QGS-LV-T with the PWR-105-HV-I, refer to the specifications of the EDS-G4014-6QGS-HV-T. | |
| Input Voltage | -LV/-LV-T models: 12/24/48 VDC, Redundant dual inputs |
| -HV/-HV-T models: 110/220 VDC/VAC, Single input | |
| Operating Voltage | -LV/-LV-T models: 9.6 to 60 VDC |
| -HV/-HV-T models: 88 to 300 VDC, 85 to 264 VAC | |
| Input Current | -LV/-LV-T models: 12-48 VDC, 1.50-0.40 A or 24 VDC, 0.70 A |
| -HV/-HV-T models: 110-220 VAC, 50-60 Hz, 0.30-0.20 A or 110-220 VDC, 0.30-0.20 A | |
| Power Consumption (Max.) | EDS-G4014-6QGS-LV(-T) models: 14.91 W |
| EDS-G4014-6QGS-HV(-T) models: 17.32 W | |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
| Physical Characteristics | |
| IP Rating | IP40 |
| Dimensions | 55 x 140 x 122.5 mm (2.17 x 5.51 x 4.82 in) |
| Weight | 846 g (1.87 lb) |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
| Housing | Metal |
| Environmental Limits | |
| Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) |
| Wide Temp. Models: -40 to 75°C (-40 to 167°F) | |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Standards and Certifications | |
| Industrial Cybersecurity | IEC 62443-4-1 |
| IEC 62443-4-2 | |
| Safety | UL 61010-2-201, EN 62368-1 (LVD) |
| EMC | EN 55022/24, EN 61000-6-2/-6-4 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV |
| IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m | |
| IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV | |
| IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV | |
| IEC 61000-4-6 CS: 10 V | |
| IEC 61000-4-8 PFMF | |
| Vibration | IEC 60068-2-6 |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Railway | EN 50121-4 |
| Traffic Control | NEMA TS2 |
| MTBF | |
| Time | EDS-G4014-6QGS-LV/LV-T models: 994,797 hrs |
| EDS-G4014-6QGS-HV/HV-T models: 487,613 hrs | |
Available Models
| Model No. | Description | |
|---|---|---|
| EDS-G4014-6QGS-HV | Managed Full Gigabit Ethernet switch with 8 10/100/1000BaseT(X) ports, 6 1000/2500BaseSFP ports, single power supply 110/220 VAC/VDC, -10 to 60°C operating temperature | |
| EDS-G4014-6QGS-LV | Managed Full Gigabit Ethernet switch with 8 10/100/1000BaseT(X) ports, 6 1000/2500BaseSFP ports, dual power supply 12/24/48 VDC, -10 to 60°C operating temperature | |
| EDS-G4014-6QGS-HV-T | Managed Full Gigabit Ethernet switch with 8 10/100/1000BaseT(X) ports, 6 1000/2500BaseSFP ports, single power supply 110/220 VAC/VDC, -40 to 75°C operating temperature | |
| EDS-G4014-6QGS-LV-T | Managed Full Gigabit Ethernet switch with 8 10/100/1000BaseT(X) ports, 6 1000/2500BaseSFP ports, dual power supply 12/24/48 VDC, -40 to 75°C operating temperature |