Search

XGS3-42000R

4-Slot Layer 3 IPv6/IPv4 Routing Chassis Switch

Product Features

  • Hardware and Performance
    4 open module slots design:
    – 2 Management Modules with 2 Standard Modules
    – 1 Management Module with 3 Standard Modules
    160-port Gigabit copper, 156-port Gigabit SFP, 60-port 10G SFP+ and 6-port 40G QSFP+
    Hot-swappable switching modules
    Non-blocking wire-speed Layer 2 and Layer 3 switching
  • Redundant Power System – 100~240V AC dual power redundant (1 default AC power supply, 1 additional open slot for optional power supply)
  • IP Routing Features –
    IP Routing protocol supports RIP v1/v2, OSPF v2, BGP4
    Routing interface provides VLAN routing mode
    Policy-based Routing(PBR) for IPv4 and IPv6
    VRRP protocol for redundant routing deployment
  • Supports Multicast Routing Protocols:
    – PIM-DM (Protocol Independent Multicast – Dense Mode)
    – PIM-SM (Protocol Independent Multicast – Sparse Mode)
    – PIM-SSM (Protocol Independent Multicast – Source-Specific Multicast Mode)
    – DVMRP (Distance Vector Multicast Routing Protocol)
    Supports IGMP v1/v2/v3
  • Supports many Layer 2 Features
  • Quality of Service – 8 priority queues on all switch ports , Supports strict priority and Weighted Round Robin (WRR) CoS policies
  • Multicast – Supports IGMP snooping v1, v2 and v3 , Querier mode support
  • Security – IEEE 802.1x port-based network access authentication , MAC-based network access authentication
  • IPv4/IPv6 Switch Management Interfaces

Product Description

XGS3-42000R Core Layer Routing Switch is specially designed for large network applications such as enterprises, campuses, communities, ISPs and data center networks where flexible configuration, large capacity, high density, high reliability and advanced traffic management are required. The XGS3-42000R is the High-density Chassis Ethernet Switch built with 4 module slots and redundant power supply. It provides great porting flexibility for network deployment by offering various combinable management modules and standard interfaces. For instance, one management module can be collaborated with three standard modules, or two management modules work with two standard modules to mutually perform system backup. Within the 6U height, single chassis, the maximum configuration can be: – 160 10/100/1000BASE-T Copper Slots – 156 100/1000BASE-SX/LX SFP Fiber Slots – 60 10G SFP+ Fiber Slots – 6 40G QSFP+ Fiber Slots Positioned as the core layer switch, the XGS3-42000R serves ideally for large- and medium-sized networks and IP metropolitan networks by supplying advanced intelligent and secure features and giving high performance and flexibility. Supporting 10/40-Gigabit Fiber Optic Ethernet 10/40-Gigabit Ethernet, which adopts the full-duplex technology instead of the low-speed, half-duplex CSMA/CD protocol, is a big leap in the evolution of Ethernet. 10/40-Gigabit Ethernet can be deployed in the star or ring topology. With the 10/40-Gigabit Ethernet technology applied, the XGS3-42000R provides broad bandwidth and powerful processing capacity. It is suitable for metropolitan networks and wide area networks. Using the XGS3-42000R, users can simplify network structures and reduce cost of network construction.

[dvin-wcql-shopbutton product_id="1365"]

Datasheet

NameAction
  • XGS3-42000R ds
Download

Specifications

Chassis Slots
Total Number of Slots 4
(2 management modules + 2 standard modules )
or
(1 management module + 3 standard modules)
Max. Management Module 2 (Slot 1, Slot 2)
Max. Standard Module 3 (Slots 2, 3, 4)
Management Module Redundancy Yes
Number of Power Supply Bays 2
Number of Fan Trays 1, hot-pluggable
Total Port Capacity
Max. 40G QSFP+ Slots 6
Max. 10G SFP+ Slots 60
Max. 10/100/1000BASE-T Slots 160
Max. 1000BASE-SX/LX SFP Slots 156
Modules
XGS3-M16C8S 24-port Gigabit (16-port TP/SFP Combo + 8-port 100/1000X SFP)/MGMT Module
XGS3-S20X2Q 20-port 10G SFP+ + 2-port 40G QSFP+ Switch Module/Standard Module
XGS3-S44S4X 44-port 100/1000BASE-X SFP + 4-port 10G SFP+ Switch Module/Standard Module
XGS3-S16C8S4X 24-port Gigabit (16-port TP/SFP combo + 8-port 100/1000X SFP) + 4-port 10G SFP+ Switch Module/Standard Module
XGS3-S48G 48-port 10/100/1000BASE-T Switch Module/Standard Module
Performance
Switch Processing Scheme Store-and-Forward
MAC Table 64K
VLAN Table 4K
ACL Table 16K max.
Routing Table IPv4 Protocol: 128K max.
IPv6 Protocol: 64K max.
Layer 3 Interface 500
Port Queues 8
Flow Control IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 9Kbytes
Hardware Specifications
Dimensions (W x D x H) 440 x 421 x 266 mm
Relative Humidity 10%~90% (non-condensing)
Operating Temperature 0°C~50°C
Power Input AC: Input 100~240V, 50~60 Hz
Power Consumption ≤500W
IPv4 Layer 3 Functions
IP Routing Protocol Static Route, RIPv1/v2, OSPFv2, BGP4
Policy-based Routing (PBR)
LPM Routing (MD5 authentication)
Multicast Routing Protocol IGMP v1/2/3, DVMRP, PIM-DM/SM, PIM-SSM
IPv4 Layer 3 Protocol VRRP, ARP, ARP proxy
Routing Interface Per VLAN
IPv6 Layer 3 Functions
IP Routing Protocol RIPng, OSPFv3, BGP4+
Multicast Routing Protocol PIM-SM/DM for IPv6
MLD for IPv6
MLDv1/v2
MLD snooping, 6 to 4 tunnels
Multicast receive control
Illegal multicast source detection
IPv6 Layer 3 Protocol Configured tunnels , ISATAP, CIDR
Layer 2 Functions
Port Configuration Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Bandwidth control on each port
Port loopback detection
VLAN 802.1Q tagged-based VLAN, up to 4K VLAN groups
Q-in-Q
GVRP
Private VLAN
Spanning Tree Protocol STP, IEEE 802.1d (Spanning Tree Protocol)
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, Spanning Tree by VLAN)
Root Guard
BPDU Guard
Link Aggregation Static trunk
IEEE 802.3ad LACP
128 trunk groups with 8 ports per trunk
QoS Traffic classification based, strict priority and WRR
8-level priority for switching
– Port number
– 802.1p priority
– DSCP/TOS field in IP Packet
Policy-based DiffServ
Multicast IGMP snooping v1/v2/v3
IGMP proxy
IGMP querier mode
MLD snooping v1/v2
Access Control List Supports standard and expanded ACL
IP-based ACL/MAC-based ACL
Time-based ACL
ACL pool can be used for QoS classification
Up to 1K entries
Security Supports MAC+ port binding
IPv4/IPv6 + MAC+ port binding
IPv4/IPv6 + port binding
Supports MAC filter
ARP spoofing prevention
ARP scanning prevention
IP source guard
Authentication IEEE 802.1x port-based network access control
AAA Authentication: IPv4/IPv6 over RADIUS
SNMP MIBs RFC-1213 MIB-II
IF-MIB
RFC-1493 Bridge MIB
RFC-1643 Ethernet MIB
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-2674 Extended Bridge MIB
RFC-2819 RMON MIB (Groups 1, 2, 3 and 9)
RFC-2737 Entity MIB
RFC-2618 RADIUS Client MIB
RFC-2933 IGMP-STD-MIB
RFC3411 SNMP-Frameworks-MIB
IEEE802.1X PAE
LLDP
MAU-MIB
Management Functions
System Configuration Console; Telnet, SSH; Web Browser; SSL; SNMPv1, v2c and v3
Management Interface IPv4/IPv6 HTTP, SSL, SNMP, FTP/TFTP, NTP, SSH
Telnet, CLI
RADIUS, TACACS+
RMON (Groups 1,2,3,9)
SNMP MTB and trap
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3z 1000BASE-SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3ae 10Gigabit Ethernet
IEEE 802.3ba 40Gigabit Etherent
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3ad Port Trunk with LACP
IEEE 802.1d Spanning Tree protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
Environment
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 10 ~ 90% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 90% (non-condensing)

Ordering info

Available Models

Model No.Model Description
XGS3-42000R 4-slot Layer 3 IPv6/IPv4 Routing Chassis Switch ( with one AC power supply unit)

MGate MB3180/MGate MB3280/MGate MB3480

1, 2, or 4 port Modbus serial (RTU) to Modbus TCP gateway

Product Features

  • Supports Auto-Device Routing for easy configuration
  • Supports route by TCP port or IP address for flexible deployment
  • Convert between Modbus TCP and Modbus RTU/ASCII
  • 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports
  • 16 simultaneous TCP masters with up to 32 simultaneous requests per master
  • Easy hardware setup and configuration
 

Product Description

These devices are Modbus RTU to Modbus TCP gateway converter for 1, 2, & 4 Serial ports. Up to 16 simultaneous Modbus TCP masters are supported, with up to 31 RTU/ASCII slaves per serial port. For RTU/ASCII masters, up to 32 TCP slaves are supported. Standard Modbus network integration, Moxa protocol converter gateway The three standard MGate™ Modbus RTU to Modbus TCP gateway converters (MB3180, MB3280, and MB3480) are designed for easy integration of Modbus RTU to Modbus TCP gateway.. With these models, Modbus serial slave devices can be seamlessly incorporated into an existing Modbus TCP network, and Modbus TCP slaves can be made accessible to serial masters. The MB3180, MB3280, and MB3480 offer features that make network integration easy, customizable, and compatible with almost any Modbus network. High density, cost effective gateway The MGate™ MB3000 Series Modbus RTU to Modbus TCP gateway converters can effectively connect a high density of Modbus nodes to the same network. The MB3280 can manage up to 62 serial slave nodes, and the MB3480 can manage up to 124 serial slave nodes. Each RS-232/422/485 serial port can be configured individually for Modbus RTU or Modbus ASCII operation and for different baudrates, allowing both types of networks to be integrated with Modbus TCP through one Modbus gateway. Auto-Device Routing for Easy Configuration (Patent Pending) Moxa’s Auto-Device Routing function helps eliminate many of the problems and inconveniences encountered by engineers who need to configure large numbers of Modbus devices. A single mouse click is all that’s required to set up a slave ID routing table and configure Modbus gateways to automatically detect Modbus requests from a supervisory control and data acquisition (SCADA) system. By removing the need to manually create the slave ID routing table, the Auto-Device Routing function saves engineers significant time and cost.

MGate MB3660 Series

8 and 16-port redundant Modbus gateways

Product Features

  • Supports Auto-Device Routing for easy configuration
  • Supports route by TCP port or IP address for flexible deployment
  • Innovative Command Learning eliminates the need to key-in
  • SCADA Modbus commands (acts as an agent gateway)
  • High performance through active and parallel polling of serial devices
  • Supports serial (Master) to serial (Slave) communications
  • 2 Ethernet ports with the same IP or dual IP addresses
  • SD card for configuration backup Modbus Auto-Device Routing
  • Access by up to 256 TCP master/client devices, or connect to 128 TCP slave/server devices
  • Dual VDC or VAC power inputs with wide power input range
  • 3-pin fault relay circuit for event alarms
  • 2 kV isolation protection (for “-I” models)

Product Description

The MGate MB3660 (MB3660-8 and MB3660-16) are Modbus RTU to Modbus TCP Gateway, redundant Modbus gateways that convert between the Modbus TCP and Modbus RTU/ASCII protocols. They can be accessed by up to 256 TCP master/client devices, or connect to 128 TCP slave/server devices. The MGate MB3660 series Modbus RTU to Modbus TCP Gateway has isolation models which provides 2 kV isolation protection suitable for power substation applications. The MGate MB3660 gateways are designed to easily integrate Modbus TCP and RTU/ASCII networks. The MGate MB3660 series gateways offer features that make network integration easy, customizable, and compatible with almost any Modbus network. For large-scale Modbus deployments, MGate MB3660 gateways can effectively connect a large number of Modbus nodes to the same network. The MB3660 series can physically manage up to 248 serial slave nodes for 8-port models or 496 serial slave nodes for 16-port models (the Modbus standard only defines Modbus IDs from 1 to 247). Each RS-232/422/485 serial port can be configured individually for Modbus RTU or Modbus ASCII operation and for different baudrates, allowing both types of networks to be integrated with Modbus TCP through one Modbus gateway.

IKS-G6524A Series

24G-port Layer 2 full Gigabit managed Ethernet switches

Product Features

  • Supports MXstudio for easy, visualized industrial network management
  • V-ON™ ensures millisecond-level multicast data and video network recovery
  • 24 Gigabit Ethernet ports
  • Up to 24 optical fiber connections (SFP slots)
  • Fanless, -40 to 75°C operating temperature range (T models)
  • Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
  • Isolated redundant power inputs with universal 110/220 VAC power supply range

Product Description

Process automation and transportation automation applications combine data, voice, and video, and consequently require high performance and high reliability industrial grade rackmount switches. The IKS-G6524A series full Gigabit backbone switches are equipped with 24 Gigabit Ethernet ports, and support Layer 3 routing functionality to facilitate the deployment of applications across networks, making them ideal for large scale industrial networks. The IKS-G6524A’s full Gigabit capability increases bandwidth to provide high performance and the ability to quickly transfer large amounts of video, voice, and data across a network. The switches support the Turbo Ring, Turbo Chain, and RSTP/STP redundancy protocols, and are fanless and come with an isolated redundant power supply to increase system reliability and the availability of your network backbone.

IKS-6726A/IKS-6728A Series

24+2G/24+4G-port modular managed Ethernet switches

Product Features

  • Modular design lets you choose from a variety of media combinations
  • -40 to 75°C operating temperature range
  • Supports MXstudio for easy, visualized industrial network management
  • V-ON™ ensures millisecond-level multicast data and video network recovery
  • 2/4 Gigabit plus 24 Fast Ethernet ports for copper and fiber
  • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
  • Isolated redundant power inputs with universal 24/48 VDC or 110/220 VAC power supply

Product Description

The IKS-6726A/6728A series of industrial rackmount switches are designed to meet the rigorous demands of mission critical applications for industry and business, such as traffic control systems and maritime applications. The IKS-6726A/6728A’s Gigabit and fast Ethernet backbone, redundant ring, and 24/48 VDC or 110/220 VAC ual isolated redundant power supplies increase the reliability of your communications and save on cabling and wiring costs. The modular design of the IKS-6726A/6728A also makes network planning easy, and allows greater flexibility by letting you install up to 4 Gigabit ports and 24 fast Ethernet ports.

RKS-G4028 Series

 

Product Features

  • Meets a wide range of demands from Fast Ethernet to full Gigabit industrial networks (up to 28 Gigabit ports)Modular interfaces for flexible connector type combinations
  • Support for IEEE 802.3bt PoE for up to 90 W output per port
  • High EMC immunity compliant with IEC 61850-3 and IEEE 1613
  • Hardware-based IEEE 1588 PTP for high-precision time synchronization
  • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches) , and STP/RSTP/MSTP for network redundancy
  • -40 to 75°C operating temperature range
  • Supports MXstudio for easy, visualized industrial network management
  • Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards

Product Description

The RKS-G4028 Series is designed to meet the rigorous demands of mission-critical applications for industry and business, such as power substation automation systems (IEC 61850-3, IEEE 1613), railway applications (EN 50121-4), and factory automation systems. The RKS-G4028 Series’ Gigabit and Fast Ethernet backbone, redundant ring, and 24 VDC, 48 VDC, or 110/220 VDC/VAC dual isolated redundant power supplies increase the reliability of your communications and save on wiring costs.

The modular design of the RKS-G4028 Series also makes network planning easy, and allows greater flexibility by letting you install up to 28 Gigabit ports with various connector types.

EDS-608/EDS-611/EDS-616/EDS-619 Series

8, 8+3G, 16, 16+3G-port compact modular managed Ethernet switches

Product Features

  • Up to 19 optical fiber connections in a compact switch (EDS-619)
  • Modular design with 4-port copper/fiber combinations
  • Hot swap media modules for continuous operation
  • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
  • TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
  • Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01
  • Supports MXstudio for easy, visualized industrial network management

Product Description

The versatile modular design of the compact EDS-600 series Ethernet switch allows users to combine fiber and copper modules to create switch solutions suitable for any automation network. The EDS-600’s modular design lets you install up to 3 Gigabit Ethernet ports and 16 Fast Ethernet ports, and the advanced Turbo Ring and Turbo Chain (recovery time < 20 ms) technology, RSTP/STP, and MSTP helps increase the reliability and availability of your industrial Ethernet network. Models with an extended operating temperature range of -40 to 75°C are also available. The EDS-600 series supports several reliable and intelligent functions, including IEEE 1588 PTPv2, EtherNet/ IP, Modbus/TCP, LLDP, DHCP Option 82, SNMP Inform, QoS, IGMP snooping, VLAN, TACACS+, IEEE 802.1X, HTTPS, SSH, SNMPv3, and more, making the Ethernet switches suitable for any harsh industrial environment.

EDS-510E Series

7+3G-port Gigabit managed Ethernet switches

Product Features

  • V-ON™ ensures millisecond-level multicast data and video network recovery
  • 3 Gigabit Ethernet ports for redundant ring or uplink solutions
  • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/ STP, and MSTP for network redundancy
  • RADIUS, TACACS+, SNMPv3, IEEE 802.1x, HTTPS, SSH, and MAC address sticky to enhance network security
  • Security features based on IEC-62443
  • EtherNet/IP, PROFINET, and Modbus/TCP protocols supported for device management and monitoring
  • Supports MXstudio for easy, visualized industrial network management

Product Description

The EDS-510E is a Industrial grade managed ethernet switch. The Gigabit managed Ethernet switch is designed to meet rigorous mission critical applications, such as factory automation, ITS and process control. The 3 Gigabit Ethernet ports allows great flexibility to build up a Gigabit redundant Turbo Ring and a Gigabit uplink. The switch adopts USB interfaces for switch configuration, system file backup, and firmware upgrade, making it easier to manage.

EDS-G508E/EDS-G512E/EDS-G516E Series

8G/12G/16G-port full Gigabit managed Ethernet switches

Product Features

  • V-ON™ ensures millisecond-level multicast data and video network recovery
  • Up to 12 10/100/1000BaseT(X) ports and 4 100/1000BaseSFP ports (EDS-G516E)
  • Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
  • RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1x, MAC ACL, HTTPS, SSH, and MAC-address sticky to enhance network security
  • Security features based on IEC-62443
  • EtherNet/IP, PROFINET, and Modbus/TCP protocols supported for device management and monitoring
  • Supports MXstudio for easy, visualized industrial network management

Product Description

The EDS-G500E series is a Industrial grade managed ethernet switch& is  equipped with 8/12/16 Gigabit Ethernet ports and up to 4 fiber optic ports, making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. Gigabit transmission increases bandwidth for higher performance and transfers large amounts of triple-play services across a network quickly. Redundant Ethernet Turbo Ring, Turbo Chain, RSTP/STP, and MSTP increase system reliability and the availability of your network backbone. The EDS-G500E series is designed especially for communication demanding applications, such as video and process monitoring, ITS, and DCS systems, all of which can benefit from a scalable backbone construction.

MDS-G4028

28G-port Layer 2 full Gigabit modular managed Ethernet switch

Product Features

  • Multiple interface type 4-port modules for greater versatility
  • Easy replacement of defect ports to minimize downtime and MTTR
  • Passive backplane to minimize the risk of malfunction
  • Ultra-compact size for easy installation
  • Rugged die-casting design for use in harsh environments
  • HTML5 for a better user experience

Product Description

The MDS-G4028 Series modular managed ethernet switch supports up to 28 Gigabit ports, including 4 embedded ports, 6 interface module expansion slots, and 2 power module slots to ensure sufficient flexibility for a variety of applications. The highly compact MDS-G4000 Series is designed to meet evolving network requirements, ensuring effortless installation and maintenance, and features a hot-swappable module design that enables you to easily change or add modules without shutting down the switch or interrupting network operations. The multiple Ethernet modules (RJ45, SFP, and PoE+) and power units (24/48 VDC, 110/220 VAC/VDC) provide even greater flexibility as well as suitability for different operating conditions, delivering an adaptive full Gigabit platform that provides the versatility and bandwidth necessary to serve as an Ethernet aggregation/edge switch. Featuring a compact design that fits in confined spaces, multiple mounting methods, and convenient tool-free module installation, the MDS-G4000 Series switches enable versatile and effortless deployment without the need for highly skilled engineers. With multiple industry certifications and a highly durable housing, the MDS-G4000 Series can reliably operate in tough and hazardous environments such as power substations, mining sites, ITS, and oil and gas applications. Support for dual power modules provides redundancy for high reliability and availability while LV and HV power module options offer additional flexibility to accommodate the power requirements of different applications. In addition, the MDS-G4000 Series modular managed ethernet switches features an HTML5–based, user-friendly web interface providing a responsive, smooth user experience across different platforms and browsers. Check MDS-G4012 (12 port modular switch) clicking here & MDS-G4020 (20 ports modular switch) on clicking here

EDS-G4014 SERIES

8G+6 2.5GbE-port full Gigabit managed Ethernet switches

Product Features

  • Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards
  • Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), and RSTP/STP for network redundancy
  • Wide range of power input options for flexible deployment
  • Compact and flexible housing design to fit into confined spaces
  • Supports MXstudio for easy, visualized industrial network management
  • Increased bandwidth capabilities with fiber SFP slots supporting up to 2.5 Gbps

Product Description

The EDS-G4014 Series is equipped with eight Gigabit Ethernet ports and six 2.5 Gbps fiber-optic ports, making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. Gigabit transmission speed increases bandwidth for higher performance and can transfer large amounts of triple-play services across a network quickly. Redundant Ethernet technologies such as Turbo Ring, Turbo Chain, and RSTP/STP increase the reliability of your system and improve the availability of your network backbone. The EDS-G4014 Series is designed specifically for demanding applications such as video and process monitoring, ITS, and DCS systems, all of which can benefit from a scalable backbone. The EDS-G4014 Series is compliant with the IEC 62443-4-2 and IEC 62443-4-1 Industrial Cybersecurity certifications, which cover both product security and secure development life-cycle requirements, helping our customers meet the compliance requirements of secure industrial network design.

NPort 5150AI-M12/NPort 5250AI-M12/NPort 5450AI-M12 Series

Railway 1, 2, and 4-port RS-232/422/485 serial device servers

Product Features

  • Speedy 3-step web-based configuration
  • COM port grouping and UDP multicast applications
  • Real COM/TTY drivers for Windows and Linux
  • Standard TCP/IP interface and versatile TCP and UDP operation modes
  • Complies with all EN 50155 mandatory test items*
  • M12 connector and IP40 metal housing
  • 2 kV isolation for serial signals
 

Product Description

The NPort 5000AI-M12 is a Serial to Ethernet Module, designed to make serial devices network-ready in an instant, and provides direct access to serial devices from anywhere on the network. Moreover, the NPort 5000AI-M12 is compliant with EN 50121-4 and mandatory sections of EN 50155, covering operating temperature, power input voltage, surge, ESD, and vibration, making them suitable for rolling stock and wayside applications where high levels of vibration exist in the operating environment.

NPort 5100A Series

1-port RS-232/422/485 serial device servers

Product Features

  • Surge protection for serial, Ethernet, and power lines
  • COM port grouping and UDP multicast applications
  • Standard TCP/IP interface and versatile TCP and UDP operation modes
  • Speedy 3-step web-based configuration
  • Screw connectors for secure installation
  • Real COM/TTY drivers for Windows and Linux
  • Connect up to 8 TCP hosts
  • Only 1 W power consumption
 

Product Description

The NPort® 5100A device servers are worlds most popular Serial to Ethernet Gateways, designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort® 5100A device servers are ultra-lean, ruggedized, and user-friendly, making simple and reliable serial-to-Ethernet solutions possible. A Greener Serial-to-Ethernet Solution

The MiiNe is a small but powerful Arm-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort® 5110A Series’ power consumption is less than 1 W. The NPort® 5100A Series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today’s industrial environments.

NPort 5110/NPort 5130/NPort 5150 Series

1-port RS-232 / 422 / 485 serial device server.

Product Features

  • Easy-to-use Windows utility for configuring multiple device servers
  • Small size for easy installation
  • SNMP MIB-II for network management
  • Real COM/TTY drivers for Windows and Linux
  • Standard TCP/IP interface and versatile operation modes
  • Configure by Telnet, web browser, or Windows utility
  • Adjustable pull high/low resistor for RS-485 ports
 

Product Description

NPort 5100 series device servers (serial to ethernet converters) are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for connecting serial devices such as card readers and payment terminals where connections are RS-232 & devices like PLC’s, Energy meters where Serial ports are RS-422 or RS-485, to an IP-based Ethernet LAN. Use the NPort 5100 series device servers to give your PC software direct access to serial devices from anywhere on the network. Using serial to ethernet converters to connect legacy serial devices to Ethernet is now common, and users expect device servers to be cost-effective and to provide a broad selection of useful functions. With its full support of Microsoft and Linux operating systems, the NPort 5110  provides the best choice for serial (RS-232)-to-Ethernet converters. For RS-485 port or a combo – RS-232 / 422 / 485 ports, please use our Nport 5130 or Nport 5150 models!

NPort 5210/NPort 5230/NPort 5232 Series

2-port RS-232/422/485 serial device servers

Product Description

The NPort 5200 serial to ethernet device servers are designed to make your industrial serial devices Internet-ready in no time. The compact size of NPort 5200 serial device servers makes them the ideal choice for connecting your RS-232 (NPort 5210/5230/5210-T/5230-T) or RS-422/485 (NPort 5230/5232/5232I/5230-T/5232-T/5232I-T) serial devices—such as PLCs, meters, and sensors—to an IP-based Ethernet LAN, making it possible for your software to access serial devices from anywhere over a local LAN or the Internet. The NPort 5200 Series has a number of useful features, including standard TCP/IP protocols and choice of operation modes, Real COM/TTY drivers for existing software, and remote control of serial devices with TCP/IP or traditional COM/TTY Port.

NPort 6150 Series

1-port RS-232/422/485 secure terminal servers

Product Features

  • Secure operation modes for Real COM, TCP Server, TCP Client, Pair Connection, Terminal, and Reverse Terminal
  • Nonstandard baudrates supported with high precision
  • Automatic RS-485 data direction control with Moxa’s patented ADDC®
  • Enhanced remote configuration with HTTPS and SSH
  • Port buffers for storing serial data when the Ethernet is offline
  • Supports IPv6
  • Generic serial commands supported in Command-by-Command mode
  • Security features based on IEC 62443

Product Description

The NPort® 6150 1-port device servers use the SSL and SSH protocols to transmit encrypted serial data over Ethernet. The NPort® 6150’s 3-in-1 serial port supports RS-232, RS-422, and RS-485, with the interface selected from an easy-to-access configuration menu.