CP-602E-I Series
CP-602E-I Series
2-port CAN interface PCI Express boards with 2 kV isolation
2-port CAN interface PCI Express boards with 2 kV isolation
Moxa’s new CP-602E-I CAN (Controller Area Network) interface board is a PCIe CAN Card & it supports the PCI Express interface. As a stand-alone
CAN controller, the CP-602E-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP-602E-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40 to 85°C wide operating temperature (CP-602E-I-T only) and 2 kV isolation make the boards suitable for use in harsh industrial environments.
| Name | Action |
|---|---|
| CP-602E-I Series Datasheet |
| Name | Action |
|---|---|
| CAN Interface Board Quick Installation Guide | |
| CAN Interface Board Users Manual |
- Features
- Ordering info
- Windows driver provided
- Optional 120 ohm terminal resistor for CAN bus network
- LED for transmit/receive status on each port
- 2 kV electrical isolation
- CAN transfer rate up to 1 Mbps
- Two independent CAN communication ports
- CAN 2.0A and CAN 2.0B supported
- DLL library and examples included
Available Models
| Model No. | Description | |
|---|---|---|
| CP-602E-I | 2-port CAN interface PCI Express board, with 2 KV optical isolation protection, 0 to 55°C operating temperature | |
| CP-602E-I-T | 2-port CAN interface PCI Express board with 2 KV optical isolation protection, -40 to 85°C operating temperature |