1 and 2-port EtherNet/IP-to-DF1 gateways
MGate™ EIP3000 gateways is a Ethernet/IP to DF1 converter for users who need to connect Allen Bradley PLCs to an EtherNet/IP network. With a number
Protocol Conversion between DF1 and EtherNet/IP
By supporting PCCC objects on CIP, the MGate™ EIP3000 can communicate seamlessly with SCADA software such as RSLinxwith the Ethernet/IP to DF1 converter. For users who develop control software based on EtherNet/IP, MGate EIP3000 offers the standard interface for connection.
Support for Multiple EtherNet/IP Connections
MGate™ EIP3000 gateways support up to 16 EtherNet/IP clients and servers simultaneously. Each client can send up to 16 requests at a time, and the multiple connection capability can help establish redundancy for more complex control systems.
Windows Utility for Easy Setup and Traffic Monitoring
Moxa provides a user-friendly Windows utility with multi-language support. The utility supports a traffic monitoring function for EtherNet/IP and DF1 protocols, and not only logs events initiated by the gateway, but also records all commands and responses that pass through the gateway. The utility helps users determine the root cause of failures and performance bottlenecks.
Serial Redirector Function Provided
The serial redirector function allows the commands of a serial master (command initiator) to be redirected to the serial slave (command executor) on another port. In addition, a serial master can operate simultaneously with EtherNet/IP masters without changing the DF1 architecture or software. With the serial redirector function, MGate™ EIP3000 gateways can establish redundant control of legacy slave devices that were originally designed to be controlled by a single serial master.
ProCOM—Virtual Serial Port for Multiple DF1 and EtherNet/IP Device Communication
Each MGate™ EIP3000 gateway supports virtual serial ports for the remote PC. You can connect to the MGate™ EIP3000 through the COM port by using Moxa’s Real COM driver, with the actual physical connection over the Ethernet. The gateway supports up to 4 virtual COM port connections and offers greater flexibility when designing redundant control systems.
Pull high/low Resistors and Terminator Selection
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, the EIP3000 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.
Complex device networks that incorporate high amperage devices could be subject to electrical signal distortion from electrical discharges, magnetic noise, or common mode transients. MGate™ series products solve this problem by using built-in optical isolation.
Visit Microsite for protocol converters to see our range of protocol converters clicking here
|MGate EIP3170/MGate EIP3270 Series ds|
|MGate EIP3170||1-port EtherNet/IP to DF1 gateway, 0 to 55°C operating temperature|
|MGate EIP3170I||1-port EtherNet/IP to DF1 gateway with 2 KV isolation, 0 to 55°C operating temperature|
|MGate EIP3270||2-port EtherNet/IP to DF1 gateway, 0 to 55°C operating temperature|
|MGate EIP3270I||2-port EtherNet/IP to DF1 gateway with 2 KV isolation, 0 to 55°C operating temperature|
|MGate EIP3170-T||1-port EtherNet/IP to DF1 gateway, -40 to 75°C operating temperature|
|MGate EIP3170I-T||1-port EtherNet/IP to DF1 gateway with 2 KV isolation, -40 to 75°C operating temperature|
|MGate EIP3270-T||2-port EtherNet/IP to DF1 gateway, -40 to 75°C operating temperature|
|MGate EIP3170-IEX||1-port EtherNet/IP-to-DF1 gateway, 0 to 55°C operating temperature, IECEx certification|
|MGate EIP3170I-IEX||1-port EtherNet/IP-to-DF1 gateway with 2 KV isolation, 0 to 55°C operating temperature, IECEx certification|
|MGate EIP3270-IEX||2-port EtherNet/IP-to-DF1 gateway, 0 to 55°C operating temperature, IECEx certification|
|MGate EIP3270I-IEX||2-port EtherNet/IP-to-DF1 gateway with 2 KV isolation, 0 to 55°C operating temperature, IECEx certification|
|MGate EIP3170-T-IEX||1-port EtherNet/IP-to-DF1 gateway, -40 to 75°C operating temperature, IECEx certification|
|DR-120-24||120W/5A DIN-rail 24 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch, or 248-370 VDC , -10 to 60°C operating temperature|
|Mini DB9F-to-TB||DB9 Female to Terminal Block connector|
|MXview||Industrial network management software designed for converged automation networks|
|DR-4524||45W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 50°C operating temperature|
|DR-75-24||75W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 60°C operating temperature|