| Spec |
Description |
| Ethernet Interface |
| Pre-installed Modules |
4 embedded Gigabit ports |
| Module |
6 slots for optional 4-port FE/GE modules |
| Slot Combination |
See the LM-7000H module series datasheet for more information |
| Standards |
IEEE 802.3 for 10BaseT |
|
IEEE 802.3u for 100BaseT(X) and 100BaseFX |
|
IEEE 802.3ab for 1000BaseT(X) |
|
IEEE 802.3z for 1000BaseX |
|
IEEE 802.3x for flow control |
|
IEEE 802.3ad for Port Trunk with LACP |
|
IEEE 802.1Q for VLAN Tagging |
|
IEEE 802.1D-2004 for Spanning Tree Protocol |
|
IEEE 802.1w for Rapid Spanning Tree Protocol |
|
IEEE 802.1p for Class of Service |
|
IEEE 802.1X for authentication |
| Ethernet Software Features |
| Filter |
GMRP, GVRP, GARP, 802.1Q VLAN, IGMP Snooping v1/v2/v3, IGMP Querier |
| Management |
IPv4/IPv6, Flow control, Back Pressure Flow Control, DHCP Server/Client, ARP, RARP,LLDP, Port Mirror, Linkup Delay, SMTP, SNMP Trap, SNMP Inform, SNMPv1/v2c/v3,RMON, TFTP, SFTP, HTTP, HTTPS, Telnet, Syslog, Private MIB |
| MIB |
P-BRIDGE MIB, Q-BRIDGE MIB, IEEE8021-SPANNING-TREE-MIB, IEEE8021-PAE-MIB,IEEE8023-LAG-MIB, LLDP-EXT-DOT1-MIB, LLDP-EXT-DOT3-MIB, SNMPv2-MIB,RMON MIB Groups 1, 2, 3, 9 |
| Redundancy Protocols |
STP, RSTP, Turbo Ring v2, Turbo Chain, Ring Coupling, Dual-Homing, Link Aggregation |
| Security |
Broadcast storm protection, Rate Limit, Trust access control, Static Port Lock, MAC,Sticky, HTTPS/SSL, SSH, RADIUS, TACACS+, Login and Password Policy |
| Time Management |
SNTP, NTP Server/Client, NTP Authentication |
| Protocols |
IPv4/IPv6, TCP/IP, UDP, ICMP, ARP, RARP, TFTP, DNS, NTP Client, DHCP Server,DHCP Client, 802.1X, QoS, HTTPS, HTTP, Telnet, SMTP, SNMPv1/v2c/v3, RMON,Syslog |
| Switch Properties |
| MAC Table Size |
16 K |
| Max. No. of VLANs |
256 |
| VLAN ID Range |
VID 1 to 4094 |
| IGMP Groups |
1024 |
| Priority Queues |
8 |
| Packet Buffer Size |
12 Mbits |
| Serial Interface |
| Console Port |
RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1) |
| USB Interface |
| USB Connector |
USB Type A (Reserved) |
| Input/Output Interface |
| Digital Input Channels |
1 (On MGMT Module) |
| Digital Inputs |
+13 to +30 V for state 1 |
|
-30 to +3 V for state 0 |
|
Max. input current: 8 mA |
| Alarm Contact Channels |
3 (On MGMT, PWR1, PWR2 Module) |
|
Relay output with current carrying capacity of 2 A @ 30 VDC |
| Power Parameters |
| Input Voltage |
Isolated redundant power module |
|
with PWR-LV-P48 installed: |
|
24/48 VDC for the switch system |
|
48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices) |
|
with PWR-HV-P48 installed: |
|
110/220 VDC/VAC for the switch system |
|
48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices) |
| Operating Voltage |
with PWR-LV-P48 installed: |
|
18 to 72 VDC for the switch system |
|
46 to 57 VDC for PoE systems |
|
with PWR-HV-P48 installed: |
|
88 to 300 VDC, |
|
90 to 264 VAC for the switch system |
|
46 to 57 VDC for PoE systems |
| Input Current |
with PWR-LV-P48 installed: |
|
PWR input current (switch system) |
|
Max. 0.53 A @ 24 VDC |
|
Max. 0.28A @ 48 VDC |
|
with PWR-HV-P48 installed: |
|
PWR input current (switch system) |
|
Max. 0.11 A @ 110 VDC |
|
Max. 0.06 A @ 220 VDC |
|
Max. 0.29 A @ 110 VAC |
|
Max. 0.18 A @ 220 VAC |
| Overload Current Protection |
Supported |
| Reverse Polarity Protection |
Supported |
| Physical Characteristics |
| IP Rating |
IP40 |
| Dimensions |
218 x 115 x 163.25 mm (8.59 x 4.53 x 6.44 in) |
| Weight |
2840 g (6.27 lb) |
| Installation |
DIN-rail mounting, Wall mounting (with optional kit), Rack mounting (with optional kit) |
| Environmental Limits |
| Operating Temperature |
Standard Temperature: -10 to 60°C (-14 to 140°F) |
|
Wide Temperature: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) |
Storage Temperature (package included) -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity |
5 to 95% (non-condensing) |
| Standards and Certifications |
| EMC |
EN 55032/35 |
| EMI |
CISPR 32, FCC Part 15B Class A |
| EMS |
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV |
|
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m |
|
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV |
|
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV |
|
IEC 61000-4-6 CS: 10 V |
|
IEC 61000-4-8 PFMF |
|
IEC 61000-4-11 DIPs |
| Safety |
EN 62368-1 |
| Railway |
EN 50121-4 |
| Traffic Control |
NEMA TS2 |
| Vibration |
IEC 60068-2-6 |
| Shock |
IEC 60068-2-27 |
| Freefall |
IEC 60068-2-31 |
| MTBF |
| Time |
966,801 hrs |
| Standards Telcordia |
SR332 |
