Spec |
Description |
Ethernet Interface |
Pre-installed Modules |
4 embedded Gigabit ports |
Module |
4 slots for optional 4-port FE/GE modules |
Slot Combination |
See the LM-7000H module series datasheet for more information |
Standards |
IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX |
IEEE 802.3ab for 1000BaseT(X) |
IEEE 802.3z for 1000BaseX |
IEEE 802.3x for flow control |
IEEE 802.3ad for Port Trunk with LACP |
IEEE 802.1Q for VLAN Tagging |
IEEE 802.1D-2004 for Spanning Tree Protocol |
IEEE 802.1w for Rapid Spanning Tree Protocol |
IEEE 802.1p for Class of Service |
IEEE 802.1X for authentication |
Ethernet Software Features |
Filter |
GMRP, GVRP, GARP, 802.1Q VLAN, IGMP Snooping v1/v2/v3, IGMP Querier |
Management |
IPv4/IPv6, Flow control, Back Pressure Flow Control, DHCP Server/Client, ARP, RARP,LLDP, Port Mirror, Linkup Delay, SMTP, SNMP Trap, SNMP Inform, SNMPv1/v2c/v3,RMON, TFTP, SFTP, HTTP, HTTPS, Telnet, Syslog, Private MIB |
MIB |
P-BRIDGE MIB, Q-BRIDGE MIB, IEEE8021-SPANNING-TREE-MIB, IEEE8021-PAE-MIB,IEEE8023-LAG-MIB, LLDP-EXT-DOT1-MIB, LLDP-EXT-DOT3-MIB, SNMPv2-MIB,RMON MIB Groups 1, 2, 3, 9 |
Redundancy Protocols |
STP, RSTP, Turbo Ring v2, Turbo Chain, Ring Coupling, Dual-Homing, Link Aggregation |
Security |
Broadcast storm protection, Rate Limit, Trust access control, Static Port Lock, MAC,Sticky, HTTPS/SSL, SSH, RADIUS, TACACS+, Login and Password Policy |
Time Management |
SNTP, NTP Server/Client, NTP Authentication |
Protocols |
IPv4/IPv6, TCP/IP, UDP, ICMP, ARP, RARP, TFTP, DNS, NTP Client, DHCP Server,DHCP Client, 802.1X, QoS, HTTPS, HTTP, Telnet, SMTP, SNMPv1/v2c/v3, RMON,Syslog |
Switch Properties |
MAC Table Size |
16 K |
Max. No. of VLANs |
256 |
VLAN ID Range |
VID 1 to 4094 |
IGMP Groups |
1024 |
Priority Queues |
8 |
Packet Buffer Size |
12 Mbits |
Serial Interface |
Console Port |
RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1) |
USB Interface |
USB Connector |
USB Type A (Reserved) |
Input/Output Interface |
Digital Input Channels |
1 (On MGMT Module) |
Digital Inputs |
+13 to +30 V for state 1 |
-30 to +3 V for state 0 |
Max. input current: 8 mA |
Alarm Contact Channels |
3 (On MGMT, PWR1, PWR2 Module) |
Relay output with current carrying capacity of 2 A @ 30 VDC |
Power Parameters |
Input Voltage |
with PWR-HV-P48 installed: 110/220 VDC, 110 VAC, 60 HZ, 220 VAC, 50 Hz, PoE: 48 VDC |
with PWR-LV-P48 installed: 24/48 VDC, PoE: 48 VDC |
with PWR-HV-NP installed: 110/220 VDC, 110 VAC, 60 HZ, 220 VAC, 50 Hz |
with PWR-LV-NP installed: 24/48 VDC |
Operating Voltage |
with PWR-HV-P48 installed: 88 to 300 VDC, 90 to 264 VAC, 47 to 63 Hz, PoE: 46 to 57 VDC |
with PWR-LV-P48 installed: 18 to 72 VDC (24/48 VDC for hazardous location), PoE: 46 to 57 VDC (48 VDC for hazardous location) |
with PWR-HV-NP installed: 88 to 300 VDC, 90 to 264 VAC, 47 to 63 Hz |
with PWR-LV-NP installed: 18 to 72 VDC |
Input Current |
with PWR-HV-P48 installed: PWR input current (switch system) Max. 0.11 A @ 110 VDC Max. 0.06 A @ 220 VDC Max. 0.29 A @ 110 VAC Max. 0.18 A @ 220 VAC EPS input current (PoE system) Max. 0.53 A @ 48 VDC (excluding the power consumption of PoE devices) |
with PWR-LV-P48 installed: PWR input current (switch system) Max. 0.53 A @ 24 VDC Max. 0.28 A @ 48 VDC EPS input current (PoE system) Max. 0.53 A @ 48 VDC (excluding the power consumption of PoE devices) |
with PWR-HV-NP installed: PWR input current (switch system) Max. 0.11 A @ 110 VDC Max. 0.06 A @ 220 VDC Max. 0.29 A @ 110 VAC Max. 0.18 A @ 220 VAC |
with PWR-LV-NP installed: PWR input current (switch system) Max. 0.53 A @ 24 VDC Max. 0.28 A @ 48 VDC |
Overload Current Protection |
Supported |
Reverse Polarity Protection |
Supported |
Physical Characteristics |
IP Rating |
IP40 |
Dimensions |
176 x 115 x 163.25 mm (6.93 x 4.53 x 6.44 in) |
Weight |
2500 g (5.51 lb) |
Installation |
DIN-rail mounting, Wall mounting (with optional kit). |
Environmental Limits |
Operating Temperature |
Standard Temperature: -10 to 60°C (-14 to 140°F) |
Wide Temperature: -40 to 75°C (-40 to 167°F) |
Storage Temperature (package included) |
Storage Temperature (package included) -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity |
5 to 95% (non-condensing) |
Standards and Certifications |
EMC |
EN 55032/35 |
EMI |
CISPR 32, FCC Part 15B Class A |
EMS |
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m |
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV |
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV |
IEC 61000-4-6 CS: 10 V |
IEC 61000-4-8 PFMF |
IEC 61000-4-11 DIPs |
Safety |
EN 62368-1 |
Railway |
EN 50121-4 |
Traffic Control |
NEMA TS2 |
Vibration |
IEC 60068-2-6 |
Shock |
IEC 60068-2-27 |
Freefall |
IEC 60068-2-31 |
Hazardous Locations |
ATEX, Class I Division 2 |
Power Substation |
IEEE 1613, IEC 61850-3 |
MTBF |
Time |
Spec |
Description |
Ethernet Interface |
Pre-installed Modules |
4 embedded Gigabit ports |
Module |
4 slots for optional 4-port FE/GE modules |
Slot Combination |
See the LM-7000H module series datasheet for more information |
Standards |
IEEE 802.3 for 10BaseT |
IEEE 802.3u for 100BaseT(X) and 100BaseFX |
IEEE 802.3ab for 1000BaseT(X) |
IEEE 802.3z for 1000BaseX |
IEEE 802.3x for flow control |
IEEE 802.3ad for Port Trunk with LACP |
IEEE 802.1Q for VLAN Tagging |
IEEE 802.1D-2004 for Spanning Tree Protocol |
IEEE 802.1w for Rapid Spanning Tree Protocol |
IEEE 802.1p for Class of Service |
IEEE 802.1X for authentication |
Ethernet Software Features |
Filter |
GMRP, GVRP, GARP, 802.1Q VLAN, IGMP Snooping v1/v2/v3, IGMP Querier |
Management |
IPv4/IPv6, Flow control, Back Pressure Flow Control, DHCP Server/Client, ARP, RARP,LLDP, Port Mirror, Linkup Delay, SMTP, SNMP Trap, SNMP Inform, SNMPv1/v2c/v3,RMON, TFTP, SFTP, HTTP, HTTPS, Telnet, Syslog, Private MIB |
MIB |
P-BRIDGE MIB, Q-BRIDGE MIB, IEEE8021-SPANNING-TREE-MIB, IEEE8021-PAE-MIB,IEEE8023-LAG-MIB, LLDP-EXT-DOT1-MIB, LLDP-EXT-DOT3-MIB, SNMPv2-MIB,RMON MIB Groups 1, 2, 3, 9 |
Redundancy Protocols |
STP, RSTP, Turbo Ring v2, Turbo Chain, Ring Coupling, Dual-Homing, Link Aggregation |
Security |
Broadcast storm protection, Rate Limit, Trust access control, Static Port Lock, MAC,Sticky, HTTPS/SSL, SSH, RADIUS, TACACS+, Login and Password Policy |
Time Management |
SNTP, NTP Server/Client, NTP Authentication |
Protocols |
IPv4/IPv6, TCP/IP, UDP, ICMP, ARP, RARP, TFTP, DNS, NTP Client, DHCP Server,DHCP Client, 802.1X, QoS, HTTPS, HTTP, Telnet, SMTP, SNMPv1/v2c/v3, RMON,Syslog |
Switch Properties |
MAC Table Size |
16 K |
Max. No. of VLANs |
256 |
VLAN ID Range |
VID 1 to 4094 |
IGMP Groups |
1024 |
Priority Queues |
8 |
Packet Buffer Size |
12 Mbits |
Serial Interface |
Console Port |
RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1) |
USB Interface |
USB Connector |
USB Type A (Reserved) |
Input/Output Interface |
Digital Input Channels |
1 (On MGMT Module) |
Digital Inputs |
+13 to +30 V for state 1 |
-30 to +3 V for state 0 |
Max. input current: 8 mA |
Alarm Contact Channels |
3 (On MGMT, PWR1, PWR2 Module) |
Relay output with current carrying capacity of 2 A @ 30 VDC |
Power Parameters |
Input Voltage |
with PWR-HV-P48 installed: 110/220 VDC, 110 VAC, 60 HZ, 220 VAC, 50 Hz, PoE: 48 VDC |
with PWR-LV-P48 installed: 24/48 VDC, PoE: 48 VDC |
with PWR-HV-NP installed: 110/220 VDC, 110 VAC, 60 HZ, 220 VAC, 50 Hz |
with PWR-LV-NP installed: 24/48 VDC |
Operating Voltage |
with PWR-HV-P48 installed: 88 to 300 VDC, 90 to 264 VAC, 47 to 63 Hz, PoE: 46 to 57 VDC |
with PWR-LV-P48 installed: 18 to 72 VDC (24/48 VDC for hazardous location), PoE: 46 to 57 VDC (48 VDC for hazardous location) |
with PWR-HV-NP installed: 88 to 300 VDC, 90 to 264 VAC, 47 to 63 Hz |
with PWR-LV-NP installed: 18 to 72 VDC |
Input Current |
with PWR-HV-P48 installed: PWR input current (switch system) Max. 0.11 A @ 110 VDC Max. 0.06 A @ 220 VDC Max. 0.29 A @ 110 VAC Max. 0.18 A @ 220 VAC EPS input current (PoE system) Max. 0.53 A @ 48 VDC (excluding the power consumption of PoE devices) |
with PWR-LV-P48 installed: PWR input current (switch system) Max. 0.53 A @ 24 VDC Max. 0.28 A @ 48 VDC EPS input current (PoE system) Max. 0.53 A @ 48 VDC (excluding the power consumption of PoE devices) |
with PWR-HV-NP installed: PWR input current (switch system) Max. 0.11 A @ 110 VDC Max. 0.06 A @ 220 VDC Max. 0.29 A @ 110 VAC Max. 0.18 A @ 220 VAC |
with PWR-LV-NP installed: PWR input current (switch system) Max. 0.53 A @ 24 VDC Max. 0.28 A @ 48 VDC |
Overload Current Protection |
Supported |
Reverse Polarity Protection |
Supported |
Physical Characteristics |
IP Rating |
IP40 |
Dimensions |
176 x 115 x 163.25 mm (6.93 x 4.53 x 6.44 in) |
Weight |
2500 g (5.51 lb) |
Installation |
DIN-rail mounting, Wall mounting (with optional kit). |
Environmental Limits |
Operating Temperature |
Standard Temperature: -10 to 60°C (-14 to 140°F) |
Wide Temperature: -40 to 75°C (-40 to 167°F) |
Storage Temperature (package included) |
Storage Temperature (package included) -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity |
5 to 95% (non-condensing) |
Standards and Certifications |
EMC |
EN 55032/35 |
EMI |
CISPR 32, FCC Part 15B Class A |
EMS |
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV |
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m |
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV |
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV |
IEC 61000-4-6 CS: 10 V |
IEC 61000-4-8 PFMF |
IEC 61000-4-11 DIPs |
Safety |
EN 62368-1 |
Railway |
EN 50121-4 |
Traffic Control |
NEMA TS2 |
Vibration |
IEC 60068-2-6 |
Shock |
IEC 60068-2-27 |
Freefall |
IEC 60068-2-31 |
Hazardous Locations |
ATEX, Class I Division 2 |
Power Substation |
IEEE 1613, IEC 61850-3 |
MTBF |
Time |
1,007,790 hrs |
Standards Telcordia |
SR332 |
|
Standards Telcordia |
SR332 |