IPOE-E302
IPOE-E302
Industrial IP67 1-Port 802.3bt PoE++ to 2-Port 802.3at/bt PoE++ Extender
Industrial IP67 1-Port 802.3bt PoE++ to 2-Port 802.3at/bt PoE++ Extender
IPOE-E302 is an industrial IP67-rated 1-port 802.3bt PoE++ to 2-port 802.3bt/at Gigabit PoE Extender designed especially for point to multipoint PoE
application. The IPOE-E302 can obtain a maximum of 95-watt PoE power from 802.3bt PoE++ or PoH (Power over HDBASE-T) input port and supplies a maximum of 65-watt PoE power budget for 2 PoE output ports, extending both the Gigabit Ethernet Data and 802.3at Power over Ethernet over the UTP cable. The IPOE-E302 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.
The IPOE-E302 is ideal for installing an extended range of outdoor PoE devices such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor PoE IP intercoms and much more. The IPOE-E302 is equipped with 3-port 10/100/1000BASE-T auto-negotiation RJ45 connectors and 3 waterproof cable glands for direct-attach applications. Assembled with waterproof cable gland, it can make the general RJ45 connector weather-proof and provides tight and strong connection, and ensures it comes with the industrial protection rating of IP67 capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold.
| Name | Action |
|---|---|
| IPOE-E302 DS |
- Features
- Specifications
- Ordering info
- 1-port data + power input , 2-port data + power Output
- Forwards both Ethernet data and PoE power to remote device
- Extends the range of PoE to an additional 100 meters (328ft.)
- Integrates address look-up engine, supporting 2K absolute MAC addresses. 9K jumbo frame support in 1000Mbps duplex mode
- IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
- Layer 2 Feature - Hardware-based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/MDI-X
- IP67-rated aluminum case. Wall-mount design
- No external power cable required for installation. Fully Plug and Play installation
- -40 to 75 degrees C operating temperature. IP67-rated aluminum case
| Hardware Specifications | |
| Network Connector | PoE in Port |
| – 1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++ “Data + DC” in | |
| – Auto MDI/MDI-X, auto-negotiation RJ45 connector | |
| PoE out Port | |
| – 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/bt PoE++ “Data + DC” out | |
| – Auto MDI/MDI-X, auto-negotiation RJ45 connector | |
| Switch Architecture | Store-and-Forward switch architecture |
| MAC Address Table | 2K MAC address table with auto learning function |
| Data Buffer | 1Mbit |
| Switch Fabric | 6Gbps |
| Switch Throughput | 4.46Mpps @ 64Bytes |
| Flow Control | IEEE 802.3x pause frame for full duplex |
| Back pressure for half duplex | |
| Jumbo Frame | 9Kbytes |
| ESD Protection | Air 8KV DC |
| Contact 6KV DC | |
| Surge Protection | 6KV |
| Enclosure | IP67-rated and IK10 aluminum case |
| Installation | Wall-mount ear |
| LED Display | Link/ACT LED x 3 |
| Dimensions (W x D x H) | 150 x 43.8 x 72.94 mm |
| 169.85 x 43.8 x 72.94 mm, with cable gland | |
| Weight | 339g |
| 372g (with three waterproof cable glands) | |
| Power Consumption | 97 watts/331.6BTU (Full loading with PoE function) |
| Power over Ethernet | |
| PoE Standard | PoE in Port |
| – IEEE 802.3bt PoE++ Type 4 standard PD | |
| – PoH (Power over HDBASE-T) | |
| – IEEE 802.3at PoE+ end-span/mid-span PD | |
| Per PoE out Port | |
| IEEE 802.3bt PoE++ Type 3 PSE | |
| Backward compatible with IEEE 802.3at PoE+ PSE | |
| PoE Power | PoE in Port |
| 50~57V DC, max. 95 watts | |
| Per PoE out Port | |
| 48~55V DC, max. 60 watts | |
| Power Pin Assignment | PoE in Port |
| 1/2 (-), 3/6 (+), 4/5 (+), 7/8 (-) or 1/2 (+), 3/6 (-), 4/5 (+), 7/8 (-) | |
| Per PoE out Port | |
| 1/2 (-), 3/6 (+), 4/5 (+), 7/8 (-) or 1/2 (+), 3/6 (-), 4/5 (+), 7/8 (-) | |
| PoE Power Budget | 65 watts (max.) @ IEEE 802.3bt PoE++ |
| 30 watts (max.) @ IEEE 802.3at PoE+ input | |
| IEEE 802.3af PoE input not supported | |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A |
| CE | |
| Stability Testing | IEC 60068-2-32 (Free fall) |
| IEC 60068-2-27 (Shock) | |
| IEC 60068-2-6 (Vibration) | |
| Standards Compliance | IEEE 802.3 Ethernet |
| IEEE 802.3u Fast Ethernet | |
| IEEE 802.3ab Gigabit Ethernet | |
| IEEE 802.3x Flow Control | |
| IEEE 802.3af Power over Ethernet | |
| IEEE 802.3at Power over Ethernet Plus | |
| IEEE 802.3bt Power over Ethernet Plus Plus | |
| Environment | |
| Operating | Temperature: -40 ~ 75 degrees C |
| Relative Humidity: 5 ~ 95% (non-condensing) | |
| Storage | Temperature: -40 ~ 85 degrees C |
| Relative Humidity: 5 ~ 95% (non-condensing) | |
Available Models
| Model No. | Description | |
|---|---|---|
| IPOE-E302 | Industrial 1-Port 802.3bt PoE++ to 2-Port 802.3at/bt Gigabit PoE Extender |